EasyManua.ls Logo

Extreme Networks ExtremeSwitching X590 Series User Manual

Extreme Networks ExtremeSwitching X590 Series
496 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ExtremeSwitching Hardware Installation
Guide
for Switches Using ExtremeXOS Version 30
121248-05 Rev. AG
December 2020

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Extreme Networks ExtremeSwitching X590 Series and is the answer not in the manual?

Extreme Networks ExtremeSwitching X590 Series Specifications

General IconGeneral
Product SeriesExtremeSwitching X590 Series
25 Gigabit Ethernet PortsUp to 48
10 Gigabit Ethernet PortsUp to 48
Operating SystemExtremeXOS
Operating Temperature0°C to 45°C (32°F to 113°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5% to 95% non-condensing
Port Count24 or 48 ports
Form Factor1U rack-mountable
Power SupplyRedundant, hot-swappable
StackingYes, up to 8 units
ManagementCLI, Web, SNMP
WeightVaries by model
AC Power Input100-240VAC, 50-60Hz
Power ConsumptionVaries by model
MTBFVaries by model

Summary

Power Supplies for Use with Your Switch

External Power Supplies

Lists compatible external power supply models for redundancy and PoE support.

Site Preparation

Installing Cable

Provides guidelines for connecting cables to network equipment and ensuring proper installation.

Building Stacks

Planning to Create Your Stack

Covers planning the physical makeup of your stack, including switches and cables.

Recommendations for Configuring Stacks

Provides guidelines for software configuration of stack parameters for optimal operation.

Setting up the Physical Stack

Provides steps for creating the physical stack by connecting switches and cables.

Installing Your Extreme Networks Switch

Safety Considerations for Installing Switches

Essential safety information and precautions before installing or removing switches.

Pre-installation Requirements

Lists necessary tools, equipment, and site preparations for switch installation.

Attaching the Switch to a Rack or Cabinet

Provides step-by-step instructions for mounting switches into racks or cabinets.

Installing Internal Power Supplies

Guides on installing one or two internal power supplies into the switch.

Connecting Power to the Switch

Details how to connect AC or DC power to the switch for operation.

Performing Initial Management Tasks

Covers initial setup and configuration steps after connecting the switch.

Replacing AC Power Supplies

Replacing DC Power Supplies

Removing Switches from Service

Technical Specifications

ExtremeSwitching X435 Series Switches Technical Specifications

Detailed technical specifications for the X435 series switches.

ExtremeSwitching X440-G2 Series Switches Technical Specifications

Detailed technical specifications for the X440-G2 series switches.

ExtremeSwitching X450-G2 Series Switches Technical Specifications

Detailed technical specifications for the X450-G2 series switches.

ExtremeSwitching X460-G2 Series Switches Technical Specifications

Detailed technical specifications for the X460-G2 series switches.

ExtremeSwitching X465 Series Switches Technical Specifications

Detailed technical specifications for the X465 series switches.

ExtremeSwitching X590 Series Switches Technical Specifications

Detailed technical specifications for the X590 series switches.

ExtremeSwitching X620 Series Switches Technical Specifications

Detailed technical specifications for the X620 series switches.

Summit X670-G2 Series Switches Technical Specifications

Detailed technical specifications for the X670-G2 series switches.

ExtremeSwitching X870 Series Switches Technical Specifications

Detailed technical specifications for the X870 series switches.

Safety and Regulatory Information

General Safety Precautions

Essential safety guidelines for handling and installing equipment.

Related product manuals