Figure 9: 5320-16P-4XE Front Panel
The rear panel of the switch includes:
1 = Kensington lock
2 = AC power inlet connector
3 = Grounding lug
4 = Cable tie mount for power cord management
Figure 10: 5320-16P-4XE Rear Panel
5320-16P-4XE-DC Switch Features
The front panel of the switch includes:
1 = Serial console port (RJ-45)
2 = USB Type-A port
3 = USB Micro-B console port
4 = 16 x 10/100/1000BASE-T (autosensing) MACsec capable ports with 802.3at Type 2
PoE (30W)
Note
The 10/100 ports support half duplex; the 1000 port supports full duplex. Half-
duplex is not supported on these ports when operating at 1Gbps.
5 = 2 x 1/10Gb SFP MACsec capable uplink ports
6 = 2 x 10Gb SFP+ Universal Ports/stacking ports
Figure 11: 5320-16P-4XE-DC Front Panel
5320-16P-4XE-DC Switch Features ExtremeSwitching 5320 Series Overview
18 ExtremeSwitching 5320 Series Hardware Installation Guide