Safety and Regulatory Information
Considerations Before Installing on page 112
General Safety Precautions on page 112
Maintenance Safety on page 113
Fiber Optic Ports and Optical Safety on page 113
Cable Routing for LAN Systems on page 114
Install Power Supply Units and Connect Power on page 115
Select Power Supply Cords on page 116
Battery Notice on page 117
Battery Warning - Taiwan on page 117
EMC Warnings on page 117
Japan (VCCI Class A) on page 118
Korea EMC Statement on page 118
Warning
Read the following safety information thoroughly before installing Extreme
Networks products. Failure to follow this safety information can lead to
personal injury or damage to the equipment.
Only trained and qualied service personnel (as dened in IEC 60950-1 and AS/NZS
3260) should install, replace, or perform service to Extreme Networks switches and their
components. Qualied personnel have read all related installation manuals, have the
technical training and experience necessary to be aware of the hazards to which they
are exposed in performing a task, and are aware of measures to minimize the danger to
themselves or other persons.
If you are located in the United States, install the system in accordance with the U.S.
National Electrical Code (NEC).
ExtremeSwitching 5320 Series Hardware Installation Guide 111
To Next Page
Loading...
Need help?
General
