Standards and Environmental Data
Table 191: Safety Standards
North American Safety of
ITE
UL 60950-1 2nd Ed., A2:2014, Listed Device (US)
CSA 22.2 #60950-1-07 2nd Ed., 2014-10 Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
European Safety of ITE EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 2nd Ed.
EN 60825-1:2007 IEC 60825-1:2007 Class 1 (Lasers Safety)
2014/35/EU Low Voltage Directive
International Safety of
ITE
CB Report & Certificate per IEC 60950-1:2005+A1:2009+A2:2013 + National
Dierences
AS/NZX 60950-1 (Australia /New Zealand)
Table 192: EMI/EMC Standards
North America EMC for
ITE
FCC 47 CFR part 15 Class A (USA)
ICES-003 Class A (Canada)
European EMC standards EN 55032:2015 Class A
EN 55024:2010
EN 61000-3-2,2014 (Harmonics)
EN 61000-3-3,2013 (Flicker)
2014/30/EU EMC Directive
EN 300 386: v1.6.1 (EMC Telecommunications)
International EMC
certifications
CISPR 32: 2015, Class A (International Emissions)
CISPR 24: 2010, Class A (International Immunity)
AS/NZS CISPR32:2015
IEC 61000-4-2:2008/EN 61000-4-2:2009 Electrostatic Discharge, 8kV
Contact, 15 kV Air, Criteria A
IEC 61000-4-3:2010/EN 61000-4-3:2006+A1:2008+A2:2010 Radiated
Immunity 10V/m, Criteria A
IEC 61000-4-4:2012/EN 61000-4-4:2012 Transient Burst, 1 kV, Criteria A
IEC 61000-4-5:2014/EN 61000-4-5:2014 Surge, 2 kV L-L, 2 kV L-G, Level 3,
Criteria A
IEC 61000-4-6:2013/EN 61000-4-6:2014 Conducted Immunity, 0.15-80
MHz, 10V/m unmod. RMS, Criteria A
IEC/EN 61000-4-11:2004 Power Dips & Interruptions, >30%, 25 periods,
Criteria C
Country-specific ACMA RCM (Australia Emissions)
VCCI Class A (Japan Emissions)
CCC mark (China)
KCC mark, EMC Approval (Korea)
Table 193: Telecom Standards
CE 2.0 Compliant
Table 194: IEEE 802.3 Media Access Standards
IEEE 802.3ba /802.3bm 40GBASE-X and 100GBASE-X
IEEE 802.3ae 10GBASE-X
Technical Specifications Standards and Environmental Data
ExtremeSwitching Hardware Installation Guide 419
To Next Page
Loading...
Need help?
General
