Table 39: External Power Supplies for X450-G2 Series Switches (continued)
Switch Model Compatible External Power Supply Model: Part Number
X450-G2-48t-GE4 150 W Non-PoE redundant power supply STK-RPS-150PS
500 W PoE+ Redundant Power Supply Unit RPS-500p: 10923
750 W Power Supply with EPS-C2 chassis 750 W AC PSU: 10931
EPS-C2: 10936
X450-G2-48t-10GE4 150 W Non-PoE redundant power supply STK-RPS-150PS
500 W PoE+ Redundant Power Supply Unit RPS-500p: 10923
750 W Power Supply with EPS-C2 chassis 750 W AC PSU: 10931
EPS-C2: 10936
Table 40: External Power Supplies for X620 Series Switches
Switch Model Compatible External Power Supply Model: Part Number
X620-8t-2x 150 W Non-PoE Redundant Power Supply STK-RPS-150PS
150 W RPS-150XT External Power Supply Unit RPS-150XT
750 W Power Supply with EPS-C2 chassis 750 W AC PSU: 10931
EPS-C2: 10936
X620-10x 150 W Non-PoE Redundant Power Supply STK-RPS-150PS
150 W RPS-150XT External Power Supply Unit RPS-150XT
750 W Power Supply with EPS-C2 chassis 750 W AC PSU: 10931
EPS-C2: 10936
Table 41: External Power Supplies for V400 Virtual Port Extenders
Switch Model Compatible External Power Supply Model: Part Number
V400 (all models) VX-RPS-1000 Redundant Power Supply VX-RPS-1000
Redundant Power
Supply on page 130
EPS-C2 Redundant Power System
The EPS-C2 is an external power supply system that supplies redundant power to switches.
It is a standalone unit that can be rack mounted in a regular 19-inch rack system. The EPS-C2 can be
populated with up to three 750 W PoE AC PSUs (power supply units) to provide a total redundant
power budget of up to 2040 W. The redundant power supply system can connect up to five switches to
actively provide power to all five if needed.
The EPS-C2 redundant power system consists of the EPS-C2 chassis (Model 10936) plus one, two, or
three installed 750 W AC power supplies (Model 10931).
EPS-C2 Redundant Power System
Power Supplies for Use with Your Switch
122 ExtremeSwitching Hardware Installation Guide
To Next Page
Loading...
Need help?
General
