Extreme Networks ExtremeSwitching X435 Series - Half-Duplex to Full-Duplex Converter Technical Specifications

Five-Slot Bracket
Table 284: Five-Slot Bracket for LRM/MACsec Adapter: Specifications
Part no. 10966
Height 4.32 cm (1.70 in)
Width 48.26 cm (19.00 in)
Length 5.00 cm (1.97 in)
Weight 487 g (1.07 lb)
Half-Duplex to Full-Duplex Converter Technical Specifications
The Half-Duplex to Full-Duplex Converter can be attached to switch ports to enable communication
over half-duplex connections with older Ethernet devices.
Order the converter using one of the following part numbers:
• 10958: HDX to FDX Converter, Rest of World
• 10959: HDX to FDX Converter: North America
Other
specifications:
• 8.8 Gbps switching capacity
• 4 priority queues
• 192Kb packet
buer
Table 285: Half-Duplex to Full-Duplex Converter Packaged Dimensions
Height 2.69 cm (1.06 in)
Width 12.9 cm (5.08 in)
Depth 6.91 cm (2.72 in)
Weight 200 g (0.44 lb)
Half-Duplex to Full-Duplex Converter Power Specifications
Table 286: Rest of the World External Power Pack (10958-CEE 7/1)
Voltage input range 200-240 VAC
Line frequency range 50 to 60 Hz
Operating temperature 0°C to 40°C (32°F to 104°F) normal operation
Table 287: North American External Power Pack (10959-NEMA 1-15P)
Voltage input range 100-120 VAC
Line frequency range 50 to 60 Hz
Operating temperature 0°C to 40°C (32°F to 104°F) normal operation
Technical Specifications Five-Slot Bracket
ExtremeSwitching Hardware Installation Guide 451