Extreme Networks ExtremeSwitching X440-G2 Series User Manual

3 Expansion Modules
V400 Virtual Port Extender
Solid-state Drives
Optional Ports for X460-G2 Switches
Several dierent hardware accessories are available for expanding the capabilities of your Extreme
Networks switch. Collectively, they are referred to as expansion modules.
•
Port option cards and versatile interface modules (VIMs) are installed in dedicated slots at the back
of the switch to provide optional I/O ports or stacking ports. These optional items add 10-Gbps
copper or fiber I/O ports to the back panel of compatible switches. If no card or module is installed,
the option slot is covered by a blank panel.
•
The TM-CLK Clock Module is required for Synchronous Ethernet (SyncE) processing on the X460-G2
switch.
The following table lists the types of expansion modules and the switch series with which they are
compatible.
Table 50: Compatibility of Expansion Modules
Module Type Name No. of Ports Type of Ports Compatible Switch
Series
VIM2 VIM-2q 2 40 gigabit QSFP+ optical
ports
X460-G2
VIM-2ss 2 high-performance
SummitStack ports
X460-G2
VIM-2t 2 10-gigabit copper BASE-T
ports
X460-G2
VIM-2x 2 10-gigabit SFP+ optical ports X460-G2
ExtremeSwitching and Summit Switches: Hardware Installation Guide 113

Extreme Networks ExtremeSwitching X440-G2 Series Specifications

General

Form Factor	Rack-mountable
VLAN Support	Yes
Humidity	5% to 95% non-condensing
Model	X440-G2 Series
Port Type	Gigabit Ethernet
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Stacking	Yes, up to 8 switches
Layer Support	Layer 2/3
Operating Temperature	0°C to 50°C
Product Type	Switch
Jumbo Frames	9216 bytes
AC Power Supply	100-240 VAC, 50-60 Hz
Storage Temperature	-40°C to 70°C
Port Configuration	24 or 48 ports
Power over Ethernet (PoE)	Optional