Fiber Optic Ports and Optical Safety
Summit X430 Series Switches Installation Note
8
Summit X430-24t Switch I/O Ports
The front panel of the Summit X430-24t switch includes:
● Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
high-density copper connectivity
● Four unpopulated 1000BASE-X unpopulated SFP ports (ports 25–28) that provide 4 Gbps of fiber
connectivity.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Ethernet management port.
● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management.
Summit X430-24p Switch I/O Ports
The front panel of the Summit X430-24p switch includes:
● Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24) that provide 24 Gbps of
high-density copper connectivity. In addition, all of these ports (ports 1-24) also support the POE
protocol IEEE802.af and POE+ protocol IEEE 802.at standard and can provide 15.4 Watts of power on
a single port up to a total power budget of 370 Watts.
● Four unpopulated 1000BASE-X unpopulated SFP ports (ports 25–28) that provide 4 Gbps of fiber
connectivity.
● Ethernet management port.
● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management.
To Next Page
Loading...
