To Next PageTo Next Page
Need help?Do you have a question about the Extreme Networks Summit X430 Series and is the answer not in the manual?
General| Model | Summit X430 Series |
|---|---|
| Product Type | Switch |
| VLANs Supported | 4094 |
| Jumbo Frame Support | 9216 bytes |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Stacking | No |
| Management | ExtremeXOS |
| Power Supply | Internal |
| Features | Layer 2/3 switching, QoS, ACLs |
Provides a general overview of the Summit family switches, their features, and capabilities.
Details the features and models of the Summit X150 series switches.
Details the features and models of the Summit X440 series switches.
Details the features and models of the Summit X460 series switches.
Details the features and models of the Summit X480 series switches.
Provides an overview of power supply options for Summit family switches.
Details external power supplies available for Summit switches and their compatibility.
Details the specifications and compatibility of replaceable internal power supplies.
Provides guidance on planning the installation site for network equipment.
Details requirements for installation sites, including environment and racks.
Outlines power requirements for Summit switches and related equipment.
Explains the concept of stacking Summit switches and available methods.
Provides instructions for physically connecting switches to form a stack ring.
Details the procedure for connecting various types of stacking cables.
Provides critical safety warnings and precautions for installing switches.
Describes the general installation process for most Summit switch models.
Details the specific steps for installing DC-powered Summit switches.
Provides instructions for installing Summit X460 series switches in racks.
Provides critical safety warnings and precautions for installing external power supplies.
Details the installation of the EPS-160 external power module into an EPS-T chassis.
Details the installation of the EPS-150DC external power module into an EPS-T2 tray.
Provides instructions for installing Summit port option cards.
Describes the installation of VIMs into X480, X650, and X670 series switches.
Provides an overview of switch removal procedures from racks.
Details the removal process for switches not in the X460/X480/X650/X670 series.
Provides instructions for removing Summit X480 series switches from racks.
Lists general safety guidelines to follow during installation and maintenance.
Provides guidelines for routing LAN cables safely and according to standards.
Details the procedures for installing power supplies and connecting them.
Provides technical specifications for Summit X150 series switches.
Provides technical specifications for Summit X440 series switches.
Provides technical specifications for Summit X460 series switches.
Provides technical specifications for Summit X480 series switches.
Provides technical specifications for Summit X650 series switches.
