Summit 300 W Power Supplies
Summit Family Switches Hardware Installation Guide
485
Summit 300 W Power Supplies
The following Summit 300 W power supplies are available for use in the Summit X460 series non-PoE
switches:
● Summit 300 W AC power supply
● Summit 300 W DC power supply Model 10933
● Summit 300 W DC power supply Model 10934A
Table 92: Summit 300 W AC Power Supply (Model 10930)
For use with the Summit X460-24t, Summit X460-24x, Summit X460-48t, and Summit X460-48x switches
Physical Specifications
Dimensions Height: 1.57 inches (4.0 cm)
Width: 3.15 inches (8.0 cm)
Depth: 9.5 Inches (24.1 cm)
Weight 2.30 lb (1 kg)
Power Specifications
Voltage input range 85 to 264 V
Nominal input ratings 100 to 240 V , 50 to 60 Hz, 5 A
Nominal input current at full loads 4.2 A @ 90 V (low-line)
1.7 A @ 230 V (high-line)
Line frequency range 47 to 63 Hz
Maximum inrush current 30 A
Output 12 V , 25 A max, 300 Watts
3.3 V , 3.03 A max, 10 Watts
Power supply input socket IEC 320 C14
Power cord input plug IEC 320 C13
Power cord wall plug Refer to “Power Cord Requirements for AC-Powered Switches and
AC Power Supplies” on page 500.
Power supply cord gauge 18 AWG (0.75 mm
2
) up to 6 feet or 2 meters
or
16 AWG (1.0 mm
2
) over 6 feet
Efficiency Low Line: 85% at 50% load and 88% at 100% load
High Line: 86% at 50% load and 89% at 100% load
Environmental Specifications
Operating temperature 0°C to 45°C (normal operation)
Storage temperature -40°C to 70°C
Operating humidity 20% to 90% relative humidity, non-condensing
Operational shock 30 m/s
2
(3 G)
To Next Page
Loading...
