Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
130
Summit X670V-48t Switch
The front panel of the Summit X670V-48t switch (Figure 109) includes:
● Forty-four 100/1000/10000 BASE-T copper ports plus four combo ports of 10G BASE-X SFP+ and
10G BASE-T (1G/10G dual speed for the combo ports)
For information about SFP+ optical modules, see the Extreme Networks Pluggable Interface Modules
Installation Guide.
● 10/100/1000-Mbps management port
● RJ-45 RS-232c serial console port used to connect a terminal and perform local management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X670 Series Switch LEDs” on
page 131.
● Stack number indicator
Figure 109: Summit X670V-48t Front Panel
The rear panel of the Summit X670V-48t switch (Figure 110) includes:
● Slot for a VIM4-40G4X versatile interface module (see “VIM4-40G4X Versatile Interface Module for
the Summit X670 Switch” on page 171)
● Three replaceable fan modules
● Two power supply bays for either AC or DC power supplies (see “Summit 550-Watt AC and DC
Power Supplies” on page 153)
Figure 110: Summit X670V-48t Rear Panel
1
2
54
6
3
1 = Stack number indicator
2 = Console port
3 = Ethernet management port
4 = 10G BASE-T(100 Mbps/1G/10G
Tri-speed) ports
5 = SFP+ ports
6 = Combination ports (1G/10G only)
Slot for VIM4
versatile interface module
Fan trays
Two power supply
(PSU) slots
SH_242
To Next Page
Loading...
