Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
24
Summit X150-24t Switch
The front panel of the Summit X150-24t switch (Figure 1) includes:
● Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
high-density copper connectivity
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X150 Series Switch LEDs” on
page 27.
● Serial console port used to connect a terminal and perform local management
Figure 1: Summit X150-24t Switch Front Panel
The rear panel of the Summit X150-24t switch (Figure 2) includes:
● Ethernet management port with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module
See “EPS-160 External Power Module (with EPS-T)” on page 140 for more information. The
connecting redundant power supply cable is shipped with the EPS-160 unit.
● AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 2: Summit X150-24t Switch Rear Panel
1
2
Stack
SH_050B
10/100 Mbps ports
Console
port
Combination ports
SH_051
Management port
Power socket
External power
supply connection
To Next Page
Loading...
