Summit X480 Series Switches
Summit Family Switches Hardware Installation Guide
117
Summit X480-24x Switch
The front panel of the Summit X480-24x switch (Figure 95) includes:
● Twelve autosensing 100/1000BASE-X ports (ports 1–12) that provide 12 Gbps of high-density fiber
(SFP) connectivity
● Twelve combination ports (ports 13–24) using RJ-45 connectors or SFPs to provide 12 Gbps of copper
or fiber connectivity. The SFP ports support both 100BASE-X and 1000BASE-X optical modules.
For more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Two unpopulated 10-Gbps XFP-based ports
● 10/100/1000 Mbps management port
● Serial console port used to connect a terminal and perform local management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X480 Series Switch LEDs” on
page 120.
● Stack number indicator
Figure 95: Summit X480-24x Switch Front Panel
The rear panel of the Summit X480-24x switch (Figure 96) includes:
● Slot for a VIM2 virtual interface module (see page 166)
● Replaceable fan tray
● Two power supply bays for either AC or DC power supplies (See “Summit 450-Watt AC and DC
Power Supplies” on page 152.)
Figure 96: Summit X480-24t Rear Panel
Stack number
indicator
XFP ports
Management port
Combination ports
SFP ports
10/100/1000
Mbps ports
Console port
SH_120
Slot for VIM2
versatile interface module
Fan tray
Two power supply
(PSU) slots
SH_154
To Next Page
Loading...
