Extreme Networks Summit X430 Series - Removing a Summit X460 Series Switch; Removing a Summit X460 AC Power Supply

Chapter 13: Removing a Summit Family Switch from a Rack
Summit Family Switches Hardware Installation Guide
386
Removing a Summit X460 Series Switch
Before you remove a Summit X460 series switch from an equipment rack, remove all installed power
supplies as described in one of the following sections:
● “Removing a Summit X460 AC Power Supply” on page 386
● “Removing a Summit X460 DC Power Supply” on page 387
Removing a Summit X460 AC Power Supply
CAUTION
The power supply may be hot to the touch; wear thermal protective gloves when handling the power
supply during removal.
To remove a Summit X460 AC power supply:
1 Disconnect the AC power cord from the wall outlet and from the power supply.
2 Push the latching tab toward the power supply handle and pull outward on the handle to disengage
the power supply internal connectors (see Figure 325).
Figure 325: Removing a Summit X460 AC Power Supply
3 Carefully slide the power supply the rest of the way out of the switch.
SH_203
SH_206
750 W AC Power Supply
300 W AC Power Supply