Chapter 6: Installing Summit Family Switches
Summit Family Switches Hardware Installation Guide
244
Figure 183: Installing the Summit X460 Series Switch
4 Secure the mounting bracket flanges to the rack, using screws that are appropriate for the rack.
(Rack-mounting screws are not provided.)
The Summit X460 series switch is shipped with a single power supply unit. You can install two power
supplies for a redundant power configuration. After the switch is secured to the rack, install the
necessary power supplies for your configuration. For instructions, see the following pages:
● 300 W AC power supply—page 247
● 750 W AC power supply—page 247
● 300 W DC power supply—page 250
To install an XGM3-2sf port option card, see page 333.
To install a stacking module, see page 335.
Installing AC Power Supplies in Summit X460 Series
Switches
Two AC power supplies are available for the Summit X460 series switches:
● Summit 300 W AC power supply (Model 10930)
This power supply is compatible with the Summit X460-24t, Summit X460-48t, Summit X460-24x,
and Summit X460-48x switch.
● Summit 750 W AC power supply (Model 10931) for PoE models
This power supply is compatible with the Summit X460-24p and Summit X460-48p switch.
AC Power Supply Cords
An AC power cord is not included with a Summit AC power supply. You can purchase AC power cords
for use in the US and Canada from Extreme Networks or from your local supplier. The cord must meet
SH_200
To Next Page
Loading...
