To Next PageTo Next Page
Need help?Do you have a question about the Extreme Networks Summit X450e-48p and is the answer not in the manual?
General| Model | Summit X450e-48p |
|---|---|
| Ports | 48 |
| Uplink Ports | 4 |
| Switching Capacity | 136 Gbps |
| Power over Ethernet | Yes |
| PoE Budget | 740 W |
| Power Supply | AC |
| MAC Address Table Size | 32, 000 |
| VLANs Supported | 4094 |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Operating Humidity | 10% to 90% non-condensing |
Provides a general overview of the Summit family switches, their features, and capabilities.
Details specific information about the Summit X150 series switches.
Lists compatible external power supply models for various Summit switches.
Details compatibility of internal power supply models with specific Summit switch series.
Explains how to connect Summit switches to form a stack configuration.
Provides instructions and examples for connecting switches in a stack ring.
Provides critical safety information before installing or removing switches.
Describes the installation process for most Summit family switches.
Provides specific details for installing DC-powered Summit switches.
Guides on initial setup, console connection, and IP configuration.
Provides step-by-step instructions for replacing a 300W AC power supply.
Provides step-by-step instructions for replacing 450W or 550W AC power supplies.
Provides step-by-step instructions for replacing a 750W AC power supply.
Provides step-by-step instructions for replacing an 850W AC power supply.
Provides step-by-step instructions for replacing a 300W DC power supply.
Provides step-by-step instructions for replacing 450W or 550W DC power supplies.
Provides step-by-step instructions for replacing an 850W DC power supply.
Outlines safety precautions to follow during maintenance procedures.
Lists general safety guidelines for handling equipment and installations.
