To Next PageTo Next Page
Need help?Do you have a question about the Extreme Networks Summit X460 Series and is the answer not in the manual?
General| Model | Summit X460 Series |
|---|---|
| Product Type | Switch |
| Manageable | Yes |
| VLANs Supported | 4094 |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Ports | 24 or 48 |
| Jumbo Frame Support | Yes |
| Power over Ethernet (PoE) | Available on some models |
| Stacking | Yes (up to 8 units) |
| Power Supply | Redundant power supply options |
| Management | ExtremeXOS |
Describes the target audience for this guide and their assumed knowledge.
Details text and icon conventions used throughout the guide for clarity.
Lists other relevant documentation for Extreme Networks Summit and ExtremeXOS products.
Provides a general overview of the Summit family switches, including their features and capabilities.
Details the features, models, and specifications of the Summit X150 series switches.
Details the features, models, and specifications of the Summit X250e series switches.
Details the features, models, and specifications of the Summit X350 series switches.
Details the features, models, and specifications of the Summit X430 series switches.
Details the features, models, and specifications of the Summit X440 series switches.
Details the features, models, and specifications for the X450, X450a, and X450e series.
Details the features, models, and specifications of the Summit X460 series switches.
Details the features, models, and specifications of the Summit X480 series switches.
Details the features, models, and specifications of the Summit X650 series switches.
Details the features, models, and specifications of the Summit X670 series switches.
Details the features, models, and specifications of the Summit X750 series switches.
Discusses compatibility and usage of pluggable optical modules for Summit switches.
Provides an overview of Extreme Networks power supplies for Summit family switches.
Details compatible external power supply models for Summit switches and their configurations.
Details compatibility of replaceable internal power supplies with Summit switch models.
Introduces Summit port option cards, VIMs, and stacking modules and their compatibility.
Describes the XGM-2xn option card for adding 10-gigabit XENPAK modules.
Describes the XGM2-2xn option card for adding 10-gigabit XENPAK modules.
Describes the XGM2-2xf option card for adding 10-gigabit XFP modules.
Describes the XGM2-2sf option card for adding 10-gigabit SFP+ modules.
Describes the XGM2-2bt option card for adding fixed 10GBASE-T ports.
Details VIM1 and VIM3 versatile interface modules for Summit X650 switches.
Details VIM2 and VIM3 versatile interface modules for Summit X480 switches.
Describes optional port cards and stacking modules for Summit X460 switches.
Details the VIM4-40G4X module for Summit X670V switches.
Outlines the three major parts of the site planning process for equipment installation.
Details requirements for installation sites, including environment and rack specifications.
Covers requirements for cable selection, labeling, installation, and interference.
Details power requirements, including PoE devices, supply, and AC/DC connections.
Lists relevant ANSI/TIA/EIA standards for cabling and grounding.
Explains how to connect Summit switches into a stack using native or alternate ports.
Provides best practices for physically placing switches for optimal SummitStack configuration.
Details how to connect switches using stacking cables for a functional stack ring.
Provides instructions for connecting various types of SummitStack stacking cables.
Explains how to connect console ports for initial stack software configuration.
Describes how to connect management ports for network management access.
Explains the status indicators for stacking ports and stack number indicators.
Provides critical safety information and warnings before installing or removing Summit switches.
Details the installation process for Summit switches excluding X460, X480, X650, and X670 series.
Provides specific details and safety requirements for installing DC-powered Summit switches.
Details the process for installing Summit X460 series switches into equipment racks.
Describes the installation of AC power supplies for Summit X460 series switches.
Provides instructions for installing 300 W DC power supplies in Summit X460 series switches.
Details the process for installing Summit X480 series switches into equipment racks.
Describes the installation of 450 W and 550 W AC/DC power supplies for Summit switches.
Details the process for installing Summit X650 series switches into equipment racks.
Describes the installation of 850 W AC/DC power supplies for Summit X650 switches.
Details the process for installing Summit X670 series switches into equipment racks.
Provides guidance on connecting network interface cables to switch ports.
Explains how to establish initial management access to the switch via the console port.
Provides critical safety information for installing and removing external power supplies.
Details the installation of the EPS-160 external power module with the EPS-T chassis.
Describes the installation of the EPS-LD external power supply unit.
Details the installation of the EPS-500 external power supply unit.
Describes the installation of EPS-600LS power modules into the EPS-C chassis.
Details the installation of the EPS-150DC external power module with the EPS-T2 chassis.
Provides instructions for installing the EPS-C2 chassis for redundant power systems.
Describes the tools and procedures for installing Summit port option cards.
Details installing stacking modules or XGM3SB-4sf cards into Slot B of X460 switches.
Explains the procedure for installing VIM1, VIM2, VIM3, and VIM4 modules.
Describes how to replace XGM and XGM2 series port option cards.
Provides instructions for replacing the 300 W AC power supply in Summit X460 switches.
Details replacing 450 W or 550 W AC power supplies in Summit X480/X670 switches.
Provides instructions for replacing the 750 W AC power supply in Summit X460 PoE switches.
Details replacing the 850 W AC power supply in Summit X650 switches.
Describes how to remove EPS-LD, EPS-500, EPS-160, and EPS-600LS redundant power supplies.
Provides instructions for replacing 300 W DC power supplies in Summit X460 switches.
Details replacing 450 W or 550 W DC power supplies in Summit X480/X670 switches.
Provides instructions for replacing the 850 W DC power supply in Summit X650 switches.
Describes how to remove an EPS-150DC power module from an EPS-T2 tray.
Lists tools and requirements for replacing fan modules in Summit switches.
Details airflow directions for Summit X670 series switches and fan modules.
Provides instructions for replacing fan modules in Summit X460, X480, X650, or X670 switches.
Details replacing stacking modules or XGM3SB-4sf cards in Summit X460 Slot B.
Describes replacing XGM3/XGM3S series port option cards in Summit X460 switches.
Explains how to replace VIMs in Summit X480, X650, and X670 series switches.
Describes how to replace XGM and XGM2 series port option cards.
Provides an overview of switch removal procedures based on model and rack type.
Details removing Summit switches (excluding X460, X480, X650, X670 series) from racks.
Provides procedures for removing Summit X460 series switches from equipment racks.
Details removing Summit X480 series switches from two-post or four-post racks.
Provides procedures for removing Summit X650 series switches from racks.
Details removing Summit X670 series switches from equipment racks.
Lists key factors to consider before installing equipment for optimal operation and safety.
Provides general safety guidelines for handling and installing equipment.
Offers recommendations for performing maintenance procedures safely on Extreme Networks equipment.
Details requirements for routing LAN cables, including inter-building connections.
Covers safe practices for installing power supplies and connecting them to power sources.
Provides requirements and recommendations for selecting AC and DC power cords.
Provides instructions for replacing and disposing of batteries in Extreme products.
Details safety warnings and precautions for working with optical devices and ports.
Provides detailed physical, power, environmental, and safety specifications for X150 switches.
Provides detailed physical, power, environmental, and safety specifications for X250e switches.
Provides detailed physical, power, environmental, and safety specifications for X350 switches.
Provides detailed physical, power, environmental, and safety specifications for X430 switches.
Provides detailed physical, power, environmental, and safety specifications for X440 switches.
Provides detailed physical, power, environmental, and safety specifications for X450 switches.
Provides detailed specifications for Summit 300 W AC and DC power supplies.
Provides detailed physical, power, environmental, and safety specifications for X450e switches.
Provides detailed physical, power, environmental, and safety specifications for X460 switches.
Provides detailed physical, power, environmental, and safety specifications for X480 switches.
Provides detailed physical, power, environmental, and safety specifications for X650 switches.
Provides detailed physical, power, environmental, and safety specifications for X670 switches.
Provides detailed specifications for Summit 300 W AC and DC power supplies.
Provides detailed specifications for Summit 450 W AC and DC power supplies.
Provides detailed specifications for Summit 550 W AC and DC power supplies.
Provides detailed specifications for the Summit 750 W AC power supply.
Provides detailed specifications for Summit 850 W AC and DC power supplies.
Details specifications for various external power supplies like EPS-LD, EPS-160, EPS-500.
Provides pinout details for console ports and associated cables.
