To Next PageTo Next Page
Need help?Do you have a question about the Extreme Networks Summit X440 Series and is the answer not in the manual?
General| Model | Summit X440 Series |
|---|---|
| Form Factor | Fixed |
| 10/100/1000BASE-T Ports | 24 or 48 |
| SFP+ Ports | 4 |
| Operating System | ExtremeXOS |
| MAC Address Table Size | 32, 000 |
| Product Series | Summit |
| Port Configuration | 24-port, 48-port |
| Port Type | SFP |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| VLANs | 4094 |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
| Power Supply | AC |
| Jumbo Frames | 9216 Bytes |
Provides a general overview of the Summit family switches, including their physical characteristics and features.
Details the Summit X150 series switches, including port types, PoE availability, and management features.
Covers the Summit X250e series switches, highlighting their port configurations, PoE options, and stacking capabilities.
Describes the Summit X350 series switches, including their port types, option slots, and power options.
Details the Summit X430 series switches, including their port types, SFP ports, and management features.
Outlines the Summit X440 series switches, including their various port types and stacking capabilities.
Describes the Summit X450, X450a, and X450e series switches, their port configurations, and power options.
Details the Summit X460 series switches, including their port types, PoE support, and option card slots.
Covers the Summit X480 series switches, including their port types, VIM slots, and power options.
Describes the Summit X650 series switches, their port types, and the need for a VIM module.
Details the Summit X670 series switches, their port types, motion sensor, and VIM compatibility.
Outlines the Summit X750 series switches, their port capabilities, and cooling requirements.
Discusses the compatibility and usage of pluggable optical modules and direct-attach cables.
Provides an overview of Extreme Networks power supplies for Summit switches, including internal and external options.
Lists compatible external power supply models for Summit family switches, detailing their compatibility.
Details the internal power supply options for Summit switches, including compatibility and specifications.
Introduces Summit port option cards, VIMs, and stacking modules and their purpose.
Details the Summit XGM-2xn option card, its compatibility, and Xenpak module information.
Describes the Summit XGM2-2xn option card, its compatibility, and Xenpak module requirements.
Covers the Summit XGM2-2xf option card, its compatibility, and XFP module information.
Outlines the Summit XGM2-2sf option card, its compatibility, and SFP+ module information.
Details the Summit XGM2-2bt option card, its compatibility, and 10GBASE-T port information.
Lists available VIMs for Summit X650 series switches and their port types.
Details compatible VIM2 and VIM3 modules for Summit X480 series switches and their port types.
Lists optional port cards and stacking modules available for Summit X460 series switches.
Describes the VIM4-40G4X module for Summit X670 switches, its port capabilities, and software requirements.
Discusses the three major parts of site planning: site requirements, cable evaluation, and power requirements.
Covers environmental and safety requirements for the installation site, including building codes.
Addresses requirements for cable selection, labeling, and installation, including standards and interference.
Outlines power requirements, including PoE devices, supply types, AC/DC power, and UPS considerations.
Lists relevant ANSI/TIA/EIA standards for cabling systems, grounding, and bonding.
Explains what a stack is and the ways to make stacking connections using native or alternate ports.
Summarizes recommended best practices for placing switches for a SummitStack configuration, including cable length and location.
Provides examples and recommendations for connecting switches using stacking cables to form a stack ring.
Details the specific types of stacking cables and their connections, including 40G cables.
Explains the necessity of connecting a console port for initial stack software configuration.
Describes how to connect management ports for network management access to the stack.
Explains the status indication of the LEDs on stacking ports.
Describes the function of the Stack Number Indicator LED for identifying switch roles in a stack.
Provides critical safety warnings and precautions before installing or removing Summit switches.
Details the installation process for Summit family switches, excluding specific higher-end series.
Provides additional details for installing Summit DC-powered switches, emphasizing safety requirements.
Outlines the process for installing Summit X460 series switches in equipment racks.
Describes how to install AC power supplies in Summit X460 series switches, detailing available models.
Provides step-by-step instructions for installing 300 W DC power supplies in Summit X460 series switches.
Outlines the procedure for installing Summit X480 series switches in equipment racks.
Details the installation of 450 W and 550 W AC and DC power supplies in Summit switches.
Outlines the process for installing Summit X650 series switches in equipment racks.
Describes how to install 850 W AC and DC power supplies in Summit X650 series switches.
Outlines the process for installing Summit X670 series switches in equipment racks.
Provides instructions for connecting network interface cables to the switch ports.
Guides the user on how to establish initial management access to the switch via the console port.
Provides critical safety information for installing or removing external power supplies.
Details the installation of the EPS-160 external power module and its chassis.
Provides instructions for installing the EPS-LD external power supply and rack-mounting it.
Outlines the process for installing the EPS-500 external power supply unit and rack-mounting it.
Details the installation of EPS-600LS power modules into the EPS-C chassis.
Provides instructions for installing the EPS-150DC external power module and its chassis.
Details the steps for installing the EPS-C2 chassis, which houses 750 W AC power supplies.
Lists the tools and equipment needed to install a Summit port option card.
Provides instructions for installing stacking modules or XGM3SB-4sf option cards into Slot B of Summit X460 switches.
Details the mechanical procedure for installing VIMs in Summit X480, X650, and X670 series switches.
Provides steps for replacing AC power supplies in Summit X460 series switches.
Details the procedure for replacing 450 W or 550 W AC power supplies in Summit X480 and X670 series switches.
Outlines the process for replacing 750 W AC power supplies in Summit X460 series switches.
Details the procedure for replacing 850 W AC power supplies in Summit X650 series switches.
Describes how to remove EPS-LD, EPS-500, EPS-160, and EPS-600LS external power supplies.
Provides steps for replacing 300 W DC power supplies in Summit X460 series switches.
Details the procedure for replacing 450 W or 550 W DC power supplies in Summit X480 and X670 series switches.
Outlines the process for replacing 850 W DC power supplies in Summit X650 series switches.
Provides instructions for removing an EPS-150DC power module from an EPS-T2 tray.
Lists the tools and requirements for replacing a fan module in Summit family switches.
Details the airflow direction for Summit X670 series switches and the importance of matching fan and power supply airflow.
Provides step-by-step instructions for replacing a fan module in Summit switches.
Details the procedure for replacing stacking modules or option cards in Slot B of Summit X460 series switches.
Provides instructions for replacing XGM3/XGM3S series port option cards in Summit X460 series switches.
Describes the procedure for replacing VIMs in Summit X480, X650, and X670 series switches.
Explains how to replace XGM and XGM2 series port option cards in Summit X350, X450a, and X450e series switches.
Introduces the chapter on removing Summit family switches from racks and lists relevant sections.
Details the process for removing Summit switches from racks, excluding specific higher-end series.
Outlines the procedure for removing Summit X460 series switches from racks, including power supply removal.
Details the process for removing Summit X480 series switches from racks, including power supply removal.
Outlines the procedure for removing Summit X650 series switches from racks, including power supply removal.
Details the process for removing Summit X670 series switches from racks, including power supply removal.
Lists factors to consider before installing equipment, including environmental and site requirements.
Provides general safety guidelines for lifting objects, using tools, and handling equipment.
Offers recommendations for performing maintenance on Extreme Networks equipment safely and properly.
Covers requirements for LAN system cable routing, including intra-building and inter-building connections.
Provides instructions and warnings for installing power supply units and connecting power.
Details requirements for selecting appropriate power supply cords, including certification and country suitability.
Provides instructions for battery replacement and disposal, emphasizing replacement by qualified personnel.
Outlines safety warnings related to optical devices, including laser modules and ports.
Lists regulatory requirements met by Extreme Networks pluggable optical modules and direct-attach cables.
Lists the switches included in the Summit X150 series and provides their technical specifications.
Lists the switches included in the Summit X250e series and provides their technical specifications.
Lists the switches included in the Summit X350 series and provides their technical specifications.
Lists the switches included in the Summit X430 series and provides their technical specifications.
Lists the switches included in the Summit X440 series and provides their technical specifications.
Lists the switches included in the Summit X450 series and provides their technical specifications.
Provides technical specifications for Summit 300 W AC and DC power supplies.
Lists the switches included in the Summit X450e series and provides their technical specifications.
Lists the switches included in the Summit X460 series and provides their technical specifications.
Lists the switches included in the Summit X480 series and provides their technical specifications.
Lists the switches included in the Summit X650 series and provides their technical specifications.
Lists the switches included in the Summit X670 series and provides their technical specifications.
Provides technical specifications for Summit 300 W AC and DC power supplies.
Lists technical specifications for Summit 450 W AC and DC power supplies.
Details technical specifications for Summit 550 W AC and DC power supplies.
Provides technical specifications for the Summit 750 W AC power supply.
Lists technical specifications for Summit 850 W AC and DC power supplies.
Lists available external power supplies and their technical specifications.
Provides pinout details for the console port and associated cables for management access.
