Extreme Networks Summit X440 Series - Summit X750-32 Q Switch

Summit X750 Series Switches
Summit Family Switches Hardware Installation Guide
133
Summit X750-32q Switch
The front panel of the Summit X750-32q switch (Figure 111) includes:
● 32 40-Gigabit Ethernet ports capable of supporting passive copper QSFP+, and active fiber QSFP+.
With quad fan out SFP+ cables, 24 of the 32 ports can each be divided into four 10-gigabit data lanes
for a total of 104 10-Gigabit ports. Groups of two or four ports are configurable to be stacking ports.
For information about QSFP+ optical modules, see the Extreme Networks Pluggable Interface Modules
Installation Guide.
For information about stacking, see Chapter 5, “Building a SummitStack Configuration”
● 10/100/1000-Mbps management port
● USB port for access to external storage
● RJ-45 RS-232c serial console port used to connect a terminal and perform local management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X750 Series Switch LEDs” on
page 134.
● Stack number indicator
Figure 111: Summit X750-32q Front Panel
The rear panel of the Summit X750-32q switch (Figure 112) includes:
● Five replaceable fan modules
● Two power supply bays for either AC or DC power supplies (see “Summit 550-Watt AC and DC
Power Supplies” on page 153)
● Two mini-BNC connectors labeled OUT for connecting a Building Integrated Timing Supply (BITS)
or GPS timing source.
-1 PPS frame output
- 10 MHz output
9
17
25 33
41
49
51 53 61
69
77
85
93
101 103
12
20
28
36
44
56 64
72
80 88
96
45
50 52
57
65 73 81
89
97
102 104
46 58 66
74
82
90 98
47
59
67
75
83
91
99
48 60 68 76 84
92
100
1
3
4
2 5
6
1 = USB port
2 = Stack number indicator
3 = Management port
4 = 40G/10G QSFP+ Ethernet ports
5 = Console port
6 = Stacking ports