Summit X440 Series Switches
Summit Family Switches Hardware Installation Guide
75
Figure 55: Summit X440-48t-10G Switch Front Panel
The rear panel of the Summit X440-48t-10G switch (Figure 56) includes:
● Redundant power input connector for optional connection to the EPS-C2 External Power Module
The connecting redundant power supply cable is shipped with the power module unit. See
“Installing an EPS-C2 Chassis” on page 322 for more information.
● AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 56: Summit X440-48t-10G Switch Rear Panel
Summit X440-48p-10G Switch
The front panel of the Summit X440-48p-10G switch (Figure 57) includes:
● Forty-eight fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–48). In addition to 48 Gbps of
high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
● Two unpopulated SFP ports (ports 47 and 48) that provide 2 Gbps of fiber connectivity. The SFP
ports support both 100BASE-FX and 1000BASE-X optical modules.
Ports 47 and 48 are implemented as shared ports that pair a copper port with a fiber port. For more
information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Two unpopulated SFP+ ports (ports 49 and 50) that provide 20 Gbps of fiber connectivity
SH_278
4
5
21
6 7
3
1 = Ethernet management port
2 = 10/100/1000BASE-T ports
3 = SFP ports
4 = Stack number indicator
5 = Console port
6 = Combination ports
7 = SFP+ ports
1
SH_28
To Next Page
Loading...
