Summit Family Switches Hardware Installation Guide
401
APPENDIX
A
Safety Information
WARNING!
Read the following safety information thoroughly before installing Extreme Networks products. Failure to
follow this safety information can lead to personal injury or damage to the equipment.
Only trained and qualified service personnel (as defined in IEC 60950-1 and AS/NZS 3260) should
install, replace, or perform service to Extreme Networks switches and their components. Qualified
personnel have read all related installation manuals, have the technical training and experience
necessary to be aware of the hazards to which they are exposed in performing a task, and are aware of
measures to minimize the danger to themselves or other persons.
If you are in the USA, install the system in accordance with the U.S. National Electrical Code (NEC).
This appendix includes the following sections:
● Considerations Before Installing on page 402
● General Safety Precautions on page 402
● Maintenance Safety on page 403
● Cable Routing for LAN Systems on page 403
● Installing Power Supply Units and Connecting Power on page 404
● Selecting Power Supply Cords on page 405
● Battery Replacement and Disposal on page 406
● Fiber Optic Ports and Optical Safety on page 406
● Sicherheitshinweise on page 408 (safety information in German)
To Next Page
Loading...
