Extreme Networks Summit X430 Series - Summit X430-48 T Switch

Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
52
Summit X430-48t Switch
The front panel of the Summit X430-48t switch (Figure 28) includes:
● Forty-eight fixed autosensing 10/100/1000BASE-T ports (ports 1–48) that provide 48 Gbps of
high-density copper connectivity
● Four 1000BASE-X unpopulated SFP ports (ports 49–52) that provide 4 Gbps of fiber connectivity.
Ports 49 through 52 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Ethernet management port
● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X430 Series Switch LEDs” on
page 53.
Figure 29: Summit X430-48t Switch Front Panel
The rear panel of the Summit X430-48t switch (Figure 30) includes:
● AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 30: Summit X440-48t Switch Rear Panel
2
54
3
1
FAN
MGMT
X430-48t
52
51
50
49
52
51
50
49
1 = Ethernet management port
2= Console port
3 = Combination ports
4 = 10/100/1000BASE-T ports
5 = SFP ports
1
1.25A
1 = AC power input connector