Extreme Networks Summit X430 Series - Summit X650 Series Switches

Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
122
Summit X650 Series Switches
The Summit X650 series switches have 24 front-panel Ethernet ports that provide 10-gigabit Ethernet
connectivity using fixed 10GBASE-T RJ-45 ports or installable SFP+ optical modules.
The Summit X650 series switches include the following base models:
● Summit X650-24t switch (page 123)
● Summit X650-24x switch (page 124)
A serial console port on the front panel of the Summit X650 series switch allows you to connect a
terminal and perform local management. An Ethernet management port can be used to connect the
system to a parallel management network for administration. Alternatively, you can use an Ethernet
cable to connect this port directly to a laptop to view and locally manage the switch configuration. The
Ethernet management port supports 10/100/1000 Mbps speeds.
The rear panel of the switch requires an installed versatile interface module or VIM. Table 34 lists the
types of VIM available for the Summit X650 series switch.
The Summit X650 series switch must have an installed VIM; the switch will not operate correctly
without one.
NOTE
The Summit X650 switches require VIM1 or VIM3 modules. Other VIM types that may appear to be
mechanically compatible with the Summit X650 switches will not function if they are installed in these switches.
Cooling is provided by a replaceable fan module. Two power supply bays accommodate either AC or
DC power supplies.
Table 34: Versatile Interface Modules for Summit X650 Series Switches
VIM Model
Number of
Ports Port Type
More Information,
Is on . . .
VIM1-SummitStack 2 20-Gbps stacking page 164
4 1-Gbps SFP data
VIM1-10G8X 2 20-Gbps stacking page 163
8 10-Gbps SFP+ data
VIM1-SummitStack512 4 128-Gbps stacking page 164
VIM1-SummitStack256 2 128-Gbps stacking page 165
VIM3-40G4X 4 40-Gbps QSFP+ data page 165