Extreme Networks Summit X430 Series - Installing an EPS-C2 Chassis

Installing an EPS-C2 Chassis
Summit Family Switches Hardware Installation Guide
323
Installing an EPS-C2 Chassis
Figure 264: EPS-C2 Power System and Summit Switch
To mount the EPS-C2 chassis in a rack:
1 Place the EPS-C2 chassis upright on a secure work surface.
2 Remove the mounting bracket kit from the packaging.
3 On each side, attach a rack mounting bracket:
a Place a rack mounting bracket over the mounting holes.
b Insert the provided screws and tighten them securely (see Figure 265).
Figure 265: Attaching the Mounting Bracket to the EPS-C2 Chassis
4 Slide the EPS-C2 into a 19-inch rack and secure it using appropriate rack-mount screws (see
Figure 266).
ESP-C2_01
Summit X440-48p Switch
ESP-C2
2x9 Output
2x7 Output
Power Configura tion Selec tor
EPS-C2
EPS_CS211