Summit X440 Series Switches
Summit Family Switches Hardware Installation Guide
73
Figure 52: Summit X440-L2-48t Switch Rear Panel
Summit X440-48p Switch
The front panel of the Summit X440-48p switch (Figure 53) includes:
● Forty-eight fixed autosensing 10/100/1000BASE-T PoE+ ports (ports 1–48). In addition to 48 Gbps of
high-density copper connectivity, these ports also provide a full 30 Watts of PoE+ per port. This
switch provides a total switch PoE power budget of 380 Watts.
● Four unpopulated SFP ports (ports 45 – 48) that provide 4 Gbps of fiber connectivity. The SFP ports
support both 100BASE-FX and 1000BASE-X optical modules.
Ports 45 through 48 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● Ethernet management port
● Serial console port implemented as an RJ-45 connector, used to connect a terminal and perform local
management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X440 Series Switch LEDs” on
page 77.
● Stack number indicator
Figure 53: Summit X440-48p Switch Front Panel
1
2
1 = AC power input connector
2 = Redundant power connector
SH_27
To Next Page
Loading...
