Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
112
Summit X460-24p Switch
The front panel of the Summit X460-24p switch (Figure 91) includes:
● Twenty-four fixed autosensing 10/100/1000BASE-T ports (ports 1–24). In addition to 24 Gbps of
high-density copper connectivity, these ports also provide up to 30 Watts of PoE per port.
● Eight unpopulated SFP ports (ports 21–28) that provide 8 Gbps of fiber connectivity. The SFP ports
support both 100BASE-X and 1000BASE-X optical modules.
Ports 21 through 24 are implemented as shared ports that pair a copper port with a fiber port. For
more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● 10/100/1000 Mbps management port
● Serial console port used to connect a terminal and perform local management
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X460 Series Switch LEDs” on
page 115.
● Stack number indicator
Figure 91: Summit X460-24p Switch Front Panel
Combination ports
Stack number
indicator
Management port
SFP ports
10/100/1000 Mbps ports
Console
port
SH_183
To Next Page
Loading...
