Chapter 1: Summit Family Switches
Summit Family Switches Hardware Installation Guide
96
Summit X450e Series Switches
The Summit X450e series switches provide 24 or 48 fixed 10/100/1000BASE-T Ethernet ports using
RJ-45 connectors. Models are available with PoE and without PoE. These switches are available only in
AC-powered models.
The Summit X450e series of switches consists of the following switches:
● Summit X450e-24t switch (page 96)
● Summit X450e-24t-TAA switch
● Summit X450e-48t switch (page 98)
● Summit X450e-48t-TAA switch
● Summit X450e-24p switch (page 100)
● Summit X450e-24p-TAA switch
● Summit X450e-48p switch (page 102)
● Summit X450e-48p-TAA switch
NOTE
In the descriptions that follow, references to a Summit X450e series model number also apply to the
equivalent TAA-compliant switch version.
Summit X450e-24t Switch
The front panel of the Summit X450e-24t switch (Figure 75) includes:
● Twenty fixed autosensing 10/100/1000BASE-T ports (ports 1–20) that provide 20 Gbps of
high-density copper connectivity
● Four combination ports (ports 21–24) using RJ-45 connectors and SFPs to provide 4 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPS, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see Table 29 on page 105.
● Serial console port used to connect a terminal and perform local management
Figure 75: Summit X450e-24t Switch Front Panel
SH_179
10/100/1000 Mbps ports
Console
port
Combination ports
Stack number
indicator
To Next Page
Loading...
