Summit X450, X450a, and X450e Series Switches
Summit Family Switches Hardware Installation Guide
97
The rear panel of the Summit X450e-24t switch (Figure 76) includes:
● Slot for one of the Summit option cards listed in Table 23. These port option cards allow you to add
one or two high-speed uplink ports to the switch.
● Management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-500 External Power Module
(Model No. 10907).
The connecting redundant power supply cable is shipped with the EPS-500 unit. See “EPS-500
External Power Supply Unit” on page 142 for more information.
● AC power input socket
The internal power supply operates from 100 VAC to 240 VAC.
Figure 76: Summit X450e-24t Switch Rear Panel
Table 24: Port Option Cards for Summit X450e Series Switches
Option Card Model Type of Added Ports For More Information, see . . .
XGM2-2xn option card 10-gigabit XENPAK modules “Summit XGM2-2xn Option Card” on page 160
XGM2-2xf option card 10-gigabit XFP modules “Summit XGM2-2xf Option Card” on page 161
XGM2-2sf option card 10-gigabit SFP+ modules “Summit XGM2-2sf Option Card” on page 162
XGM2-2bt option card Fixed 10GBASE-T copper “Summit XGM2-2bt Option Card” on page 162
10 Gigabit
uplink option
Management port Power socket
External power
supply connection
SH_181
To Next Page
Loading...
