Summit X250e Series Switches
Summit Family Switches Hardware Installation Guide
29
Summit X250e-24t Switch
The front panel of the Summit X250e-24t switch (Figure 7) includes:
● Twenty-four fixed autosensing 10/100BASE-T ports (ports 1–24) that provide 2.4 Gbps of
high-density copper connectivity
● Two combination ports (ports 25–26) using RJ-45 connectors and SFPs to provide 2 Gbps of copper
or fiber connectivity
For more information about combination ports, see “Combination Ports and Failover” on page 22.
For information about SFPs, see the Extreme Networks Pluggable Interface Modules Installation Guide.
● LEDs to indicate port status and switch operating conditions
For a description of the LEDs and their operation, see “Summit X250e Series Switch LEDs” on
page 42.
● Stack number indicator showing the position of this switch in a stacked configuration
● Serial console port used to connect a terminal and perform local management
Figure 7: Summit X250e-24t Switch Front Panel
The rear panel of the Summit X250e-24t switch (Figure 8) includes:
● Ethernet management port with associated LEDs
● Two high-performance stacking ports with associated LEDs
● Redundant power input connector for optional connection to the EPS-160 External Power Module
The connecting redundant power supply cable is shipped with the EPS-160 unit. See “EPS-160
External Power Module (with EPS-T)” on page 140 for more information.
● AC power input socket
The internal AC power supply operates from 100 VAC to 240 VAC.
Figure 8: Summit X250e-24t Switch Rear Panel
1
2
Stack
SH_038B
10/100 Mbps ports
Console
port
Combination portsStack number indicator
Redundant Power Input
! See Manual
10 Gigabit
stacking ports
Management port
Power socket
External power
supply connection
To Next Page
Loading...
