Need help?Do you have a question about the Extron electronics IPCP Pro 250 and is the answer not in the manual?
General| Model | IPCP Pro 250 |
|---|---|
| Series | IPCP Pro |
| RS-232 | 1 |
| Ethernet Ports | 1 x 10/100/1000 Mbps |
| USB Port | 1 (Type A) |
| Operating Temperature | 0 to +50 °C (+32 to +122 °F) |
Explains the methods and requirements for configuring device control commands via the IPCP.
Describes the Global Configurator software and necessary PC system specifications for setup.
Provides a step-by-step checklist guiding the user through the installation process.
Guides the user through configuring network settings for the IPCP Pro Series.
Explains how to connect power supplies to the IPCP Pro Series units.
Introduces the necessity of configuration and control methods for the IPCP Pro Series.
Guides on resolving issues with connections, power, and verifying device control setups.
Provides instructions on locating, downloading, and installing new firmware for the IPCP Pro Series.
To Next Page
