Extron electronics IPCP Pro 350 - User Manual

User Guide
IPCP Pro Series
IP Link
®
Pro Products
IP Link Pro Control Processors
68-2438-01 Rev. C
02 16
IPCP Pro
Series User
Guide

Extron electronics IPCP Pro 350 Specifications

General

Model	IPCP Pro 350
Series	IPCP Pro
Digital I/O	8
eBUS port	1
PoE	No
Processor	Dual-core ARM Cortex-A9
Memory	1 GB
Ethernet Ports	2 (10/100/1000 Mbps)
USB Ports	2 (USB 2.0)
Serial Ports	2
IR/Serial Ports	4
GPIO	8
Relay	2
Dimensions	1.75" H x 8.5" W x 6.0" D (4.4 cm x 21.6 cm x 15.2 cm)
Operating Temperature	32° to 122°F (0° to 50°C)

Summary

About the IPCP Pro Series

Device Control

About Global Configurator

Hardware Features and Installation

Setup Checklist: How to Proceed With Installation

Provides a checklist to guide users through the installation process.

Network Communication Setup

Front Panel Features

Rear Panel Features and Connections

Power Connections

Bidirectional Control and Communication Connections and Features

LAN (IP) connectors and LEDs

Unidirectional Control and Communication Connections

Relay ports

Additional Control Ports

Digital I;O (digital input;output) ports

Volume control port

Resetting the Unit

Software-Based Configuration and Control

Configuration and Control: an Overview

Provides a general overview of the IPCP configuration and control process.

Basic Setup Steps: a Guide to this Section and Other Resources

Downloading the Software and Getting Started

Troubleshooting

Reference Information

Network Requirements

Firmware Updates

Determining the Firmware Version

Explains methods to check the current firmware version of the control processor.