To Next PageTo Next PageWhat causes the over heat alarm to activate on my EYELA LTI-1200E?
The over heat alarm activates on your EYELA Accessories if the setting value for the over heat protector is too low. For the settings for over heat protector, set the temperature +10° higher than the setting temperature of the temperature controller. If the setting temperature is too high, set the value up to 30°.
What causes the lower temperature limit alarm to activate on my EYELA Accessories?
The lower temperature limit alarm on your EYELA Accessories can activate if too many samples and vessels in the chamber prevents the convection flow of the heat, or if the heater is disconnected. Reduce the number of sample or vessel. If the heater is disconnected, immediately stop running the product and contact your local agency or the closest customer service center.
Why is the temperature not stable in my EYELA Accessories?
Temperature instability in your EYELA Accessories can be caused by constant changes in room temperature due to the influence of an air conditioner. Ensure the unit is placed where the air conditioner's airflow does not directly affect it.
What should I do if the door alarm, temperature control failure alarm, or temperature not rising alarm is activated on my EYELA Accessories?
If the door alarm, temperature control failure alarm, or temperature not rising alarm is activated on your EYELA Accessories, it's likely that the door is not closed completely. Ensure the door is fully closed.
What to do if the over load alarm for refrigeration unit is activated on my EYELA Accessories?
If the overload alarm for the refrigeration unit is activated on your EYELA Accessories, it indicates that the heat load is too heavy. Reduce the load.
General| Brand | EYELA |
|---|---|
| Model | LTI-1200E |
| Category | Accessories |
| Language | English |
Explains the meaning of alert marks and signal words used in the manual.
Emphasizes caution due to the lack of explosion-proof structure.
Explains the layout and function of the control panel buttons and indicators.
Specifies suitable conditions for installing the unit to ensure optimal performance.
Provides installation conditions and cautions for carrying the unit.
