Page|4
VPL must be anchored to a concrete slab before operating the VPL while it is occupied. Using the VPL while
occupied before installation can be hazardous.
Maintaining all labels and manuals in legible condition is required by the VPL owner and is essential for safe
VPL operation. The VPL comes with various product safety labels. Do not remove safety labels or devices. If
any labels are missing, damaged or become illegible they must be replaced. An illegible decal will fail to alert
individuals on or around the machine of a procedure or hazardous operating conditions. Contact your dealer for
additional information, replacement labels and manuals or to schedule inspections, repairs or service.
For proper warranty coverage, fill out and return the included warranty form.
Keep all panels and protective coverings in place.
The VPL warranty is not transferable.
Attempting to tamper with or modify any portion of the VPL will void your warranty.
Except as described elsewhere in this manual, maintenance must only be performed by qualified technicians.
Contact your dealer to schedule any needed maintenance, inspections, repairs or service.
Caustics, high alkaline detergents and solutions should not be used to clean aluminum.
Using this VPL for anything other than its intended purpose will void the warranty.
SECTION 2 – LABELING AND DEALER CONTACT INFORMATION
Assure all labels are present and legible.
VPL Safety labels come pre-installed.
Each VPL should have labels positioned on the
PL as illustrated in the image to the right.
The labels shown at right are for illustrative
purposes only. Labeling on your particular VPL may
iffer in color, boarders, size, and content.
FIG. 2.1
To Next Page
Loading...
Need help?
General
