To Next PageTo Next Page
Need help?Do you have a question about the EZ-ACCESS TRANSITIONS Angled Entry Mat and is the answer not in the manual?
Keep mat clear of ice, snow, dirt, leaves. Sweep or wash with soft brush and mild detergent.
Mat surface may be slippery in wet conditions. Use caution as traction may be reduced.
Ensure mat is not damaged or unstable before each use to prevent injury.
Place mat flush against raised landing with top edge within a ¼" height variance.
Ensure the intended location is free of dirt and debris before placement.
Trim mat to accommodate lower heights or notch for doorjamb configuration.
Anchor to wood using Phillips head screws, seated just below mat surface.
Anchor to concrete using pin anchors and hammer, seated just below mat surface.
The EZ-ACCESS® TRANSITIONS® Angled Entry Mat is a versatile and durable solution designed to provide a smooth and safe transition over raised landings, making it ideal for use with mobility equipment. This mat is engineered to enhance accessibility, ensuring that individuals using wheelchairs, scooters, or other mobility aids can navigate entryways with greater ease and security. Its angled design allows for a gradual incline, reducing the abruptness of steps and thresholds, which is crucial for preventing falls and ensuring user comfort.
The primary function of the TRANSITIONS® Angled Entry Mat is to bridge the height difference between a ground surface and a raised landing, such as a doorway threshold, a patio door, or a small step. By creating a gentle slope, it eliminates the need to lift or maneuver mobility devices over obstacles, thereby promoting independence and safety. The mat is available in two different heights, 1½" and 2½", allowing users to select the option that best matches their specific needs and the height of their raised landing. This selection ensures an optimal slope for various mobility equipment, adhering to recommended incline guidelines for safe operation.
One of the key usage features of this mat is its adaptability to different environments and user requirements. The mat can be easily trimmed and notched to fit specific doorjamb configurations or to achieve lower heights, providing a custom fit for almost any entryway. This customization capability is particularly beneficial for older homes or unique architectural designs where standard ramps might not fit perfectly. The trimming process, while requiring careful attention and appropriate tools, allows for precise adjustments, ensuring that the mat integrates seamlessly with the existing structure. When trimming, it is important to follow safety guidelines for hand tools to prevent injury.
The mat is designed for secure placement and stability. It must be positioned flush against the raised landing, with its top edge not exceeding a ¼" height variance, to ensure a smooth and safe transition. This precise placement is critical for preventing any gaps or uneven surfaces that could pose a tripping hazard or impede the movement of mobility equipment. The mat also includes provisions for anchoring, which is a crucial safety feature. Depending on the surface of the raised landing, the mat can be anchored to wood using provided Phillips head screws or to concrete using mushroom head drive pin anchors. These anchoring methods ensure that the mat remains firmly in place, preventing any movement or shifting during use, which is paramount for user safety. The anchoring points are strategically located approximately 1" from each lower corner edge, providing robust stability.
Safety is a paramount consideration in the design and usage of the TRANSITIONS® Angled Entry Mat, as highlighted by numerous warnings in the manual. Users are strongly advised to read and follow all instructions and warnings prior to assembly and use. The mat has a maximum weight capacity of 850 lbs., and this limit must never be exceeded. When used with mobility equipment, users must refer to their equipment's owner guide for acceptable incline usage and chair direction, ensuring that the mat's slope does not exceed the equipment's recommendations. The use of a lap belt is always recommended when using the mat with mobility equipment. Furthermore, it is crucial to ensure that the mat is not damaged or unstable before each use, as any compromise in its integrity could lead to injury. The landing surface where the mat is placed must be substantial, sound, and capable of supporting the mat's weight capacity, and it must be level and unobstructed to allow for proper anchoring and flush placement. Sufficient maneuvering room at both ends of the mat is also necessary to ensure safe entry and exit.
Maintenance features for the TRANSITIONS® Angled Entry Mat are straightforward, focusing on keeping the mat clean and ensuring its continued safe operation. Users are instructed to keep the mat surface clear of ice, snow, dirt, leaves, and other debris. For ice and snow, accumulations should be removed, and the surface swept clean. For dirt, leaves, and other debris, the surface should be swept or washed with a soft-bristle brush and a non-alkaline detergent, then rinsed well. It is important to note that the mat surface may become slippery in wet conditions, so caution should be exercised to reduce the risk of reduced traction. Regular cleaning not only maintains the mat's appearance but also ensures that its textured surface provides optimal grip. Beyond cleaning, users must consistently check that the mat remains flush against the raised landing and that it is not damaged or unstable before each use. Adherence to these simple maintenance steps will prolong the life of the mat and ensure its reliable and safe performance over time.
In summary, the EZ-ACCESS® TRANSITIONS® Angled Entry Mat is a thoughtfully designed accessibility product that prioritizes safety, adaptability, and ease of use. Its function is to create a smooth transition over raised obstacles, while its usage features, such as customizability and secure anchoring, make it a practical solution for various entryways. Coupled with clear maintenance guidelines, this mat offers a durable and effective way to enhance accessibility for individuals using mobility equipment.
General| Category | Lifting Systems |
|---|---|
| Type | Angled Entry Mat |
| Material | Rubber |
| Color | Black |
| Usage | Indoor/Outdoor |
| Size | Varies (customizable) |
