9
DISPLAY CHARACTERISTICS
- DISPLAY : Nine Digit 0.56" LED with M/n, K/u, Hz, m, Sec, G.T, Hold, and
“OF” indicators. Function and Gate time: User Selected.
“OF” Display Shown When Count exceeds 999 999 999
- HOLD : In Frequency and Period, TOTAL. Mode measurement in
progress is stopped, and the last complete measurement is
displayed. When Hold is released, a new measurement begins.
- GATE TIME : Dipending on input frequency
< 10mS------------Somewhere between 0.9 and 9mS
< 0.1S--------------Somewhere between 9 and 90mS
< 1S---------------- Somewhere between 90 and 900mS
< 10S---------------Somewhere between 0.9 and 9S
NOTE: LAST MEASUREMENT DISPLAY WILL REMAIN FOR 10 SECONDS AFTER
SIGNAL OFF.
DIMENSION AND WEIGHT
- Dimensions : 255(W) x 90(H) x 255(D)mm
- Weight : Approx. 2.0 kg.
1-3. Equipment Ratings
Power & Fuse Ratings
Power Max.
Input Voltage Fuse
FC-7150U,FC-7015U FC-3000, FC-7150,
FC-7015
103 ∼ 126V AC(50/60Hz) F 0.5A 250V 15W 10W
206 ∼ 252V AC(50/60Hz) F 0.25A 250V 15W 10W
Operating Environment
TEMPERATURE : 0 ° C to + 40 ° C (Accuracy Specified at 25° C ± 5 ° C)
HUMIDITY : Up to 85% to 40°C without temperature extremes
causing condensation within the instrument.
Storage Environment
TEMPERATURE : -20° C to +70° C
HUMIDITY : below 85% RH
Insulation Category II : Portable equipment of local level.
Pollution Degree : 2
Protection to IEC 529 : Ordinary
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com
To Next Page
Loading...