EasyManua.ls Logo

EZ Goal 38 - User Manual

EZ Goal 38
9 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Page 1
03-67099 rev. 2017-04-06
#
38
2" 4'x6' BACK FOLDING
METAL HOCKEY GOAL
No. Sketch






I

\

d





  

 �l



I




•

0
17

o








 

D
Description




 
  
  



 
 





 


Part#
 
 



 
 














Qty













2

2

2


Installation
Instructions

COMPLETELY

DO NOT RETURN
PRODUCT TO THE
STORE





Seice@ezgoal.net
203 591 9032
 
page1
#
6
7
099
#
38
2" 4'x6' BACK FOLDING
METAL HOCKEY GOAL
No. Sketch






I

\

d





  

 �l



I




•

0
17

o








 

D
Description




 
 
  



 
 





 


Part#
 
 



 
 














Qty













2

2

2


Installation
Instructions

COMPLETELY

DO NOT RETURN
PRODUCT TO THE
STORE





Seice@ezgoal.net
203 591 9032
 
page1
#
6
7
099
#38 / #67099
Front end swedged top rail 5038551 331 1
Front end plain top rail 5038551 332 1
Left upper front corner 5038552 303 1
Right upper front corner 5038552 307 1
Red folding leg 5038552 304 2
Left base bend 5038551 351 1
Rigth base bend 5038551 352 1
Rear base with two swedges 5038551 341 1
Rear base with one swedge 5038551 342 1
Upper back support with holes 5038551 311 1
Lower back support with pin 5038551 309 1
Top shelf left corner 5038551 321 1
Top shelf right corner 5038551 322 1
White lacing rope 9141 2
Hockey net 1,2 m x 1,8 m 69115 1
8 mm folding section bolt 5310 2
8 mm shelf locking nut 008 3
Pull pin 60 mm x 6,03 cm 6592 2
Allen wrench 018 1
Wrench 017 1
1,20 m X 1,80 m (4 x 6 ft)
BACK FOLDING
METAL HOCKEY GOAL
No. Illustration Description Part # Qty.
INSTALLATION
INSTRUCTIONS
Please read instructions
COMPLETELY
before assembly.
DO NOT RETURN
PRODUCT TO THE
STORE
Missing parts,
need replacements, or
help with assembly
Please contact
Customer Service:
service@ezgoal.net
(+1) 203-591-9032
Waterbury, CT 06710 U.S.A.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the EZ Goal 38 and is the answer not in the manual?

Summary

EZGOAL Back Folding Metal Hockey Goal

Installation Instructions

Guidance for assembling the hockey goal, emphasizing completeness before starting.

Customer Support and Return Policy

Information on product returns, missing parts, and customer service contact details.

Hockey Goal Assembly and Folding

Assembly Steps

Detailed steps for assembling the hockey goal frame and attaching the net.

Folding and Storing the Goal

Instructions on how to fold the hockey goal for storage with the net attached.

EZGOAL Wheel Kit

Wheel Kit Installation Guide

Instructions and parts list for attaching the wheel kit to the hockey goal.

EZGOAL Backstop Kit with Targets

Backstop Kit Components

List of components included in the backstop kit for the hockey goal.

Backstop Assembly and Lacing

Detailed instructions for assembling the backstop and lacing the net securely.

Backstop Folding and Safety

Instructions for folding the backstop and important safety precautions.

Target Nets Installation

Target Pockets Installation

Steps for attaching target pockets to the hockey goal frame.

Shooter Tutor Installation

Shooter Tutor Setup

Instructions for installing the Shooter Tutor with target nets on the hockey goal.

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Main Goal (#38/#67099)
  4. Wheel Kit
  5. Backstop Kit with Targets
  6. Shooter Tutor with replaceable target nets
  7. Usage Features
  8. Maintenance Features

This document provides instructions and information for the EZGOAL Back Folding Metal Hockey Goal, model #38/#67099, designed for 1.20 m x 1.80 m (4 x 6 ft) dimensions. It also includes details for optional accessories: a Wheel Kit, a Backstop Kit with Targets, and a Shooter Tutor with replaceable target nets.

Function Description:

The EZGOAL Back Folding Metal Hockey Goal is a portable and foldable hockey goal designed for recreational use. Its primary function is to serve as a target for hockey practice and games. The "back folding" feature allows for compact storage and easier transport. The optional Wheel Kit enhances portability, enabling users to move the goal with less effort. The Backstop Kit with Targets provides an extended net area behind the goal to catch missed shots and includes target pockets for skill development. The Shooter Tutor accessory offers a practice aid with specific target zones to improve shooting accuracy.

Important Technical Specifications:

Main Goal (#38/#67099):

  • Dimensions: 1.20 m x 1.80 m (4 x 6 ft)
  • Frame Material: Metal
  • Folding Mechanism: Back folding design for storage. Features pull pins on folding legs and buttons on the top rail and top shelf for folding.
  • Net: Hockey net, 1.2 m x 1.8 m (Part # 69115). Features red and green tabs for alignment.
  • Assembly: Requires connecting folding sections and base parts. Precision connections are designed to fit snugly; a rubber mallet or block of wood may be needed. Folding section bolts should be on the inside and front, with nuts on the outside. Nuts should not be overtightened.
  • Components (Key Parts):
    • Front end swedged top rail (5038551 331)
    • Front end plain top rail (5038551 332)
    • Left/Right upper front corner (5038552 303, 5038552 307)
    • Red folding leg (5038552 304)
    • Left/Right base bend (5038551 351, 5038551 352)
    • Rear base with swedges (5038551 341, 5038551 342)
    • Upper/Lower back support (5038551 311, 5038551 309)
    • Top shelf left/right corner (5038551 321, 5038551 322)
    • White lacing rope (9141)
    • 8 mm folding section bolt (5310)
    • 8 mm shelf locking nut (008)
    • Pull pin 60 mm x 6.03 cm (6592)
    • Allen wrench (018)
    • Wrench (017)

Wheel Kit:

  • Function: Adds wheels to the goal for enhanced portability.
  • Components:
    • Wheel (50123) - 2 units
    • 8 mm bolt (6510) - 2 units
    • 8 mm self-locking nut (008) - 2 units
  • Installation Note: Nut goes on the outside of the goal, bolt on the inside. Do not overtighten the nut and bolt; it must spin inside the hole, and the nylon on the nut must be flush with the bolt to prevent spinning off.

Backstop Kit with Targets:

  • Compatibility: Fits 1.2 m x 1.8 m (4 ft x 6 ft) EZgoal hockey goals.
  • Function: Extends the net area to catch missed shots and includes target pockets for accuracy training.
  • Components (Key Parts):
    • Bottom U tube (PS56251 112) - 2 units
    • Top U tube (PS56251 022) - 2 units
    • Lower/Upper inside upright (PS56251 033, PS56251 044) - 2 units each
    • Outside upright (PS56251 055) - 4 units
    • Bolts 8 x 80 mm (B875) - 2 units
    • Bolts 8 x 30 mm (B830) - 2 units
    • Butterfly nuts 8 mm (N80) - 3 units
    • Black ropes (4.5 m, 1.5 m, 38 cm) for lacing and securing.
    • Side backstop net (9177) - 2 units
    • Top backstop net (9178) - 1 unit
    • Hockey 4 pocket targets nets 5 mm (69102) - 1 unit
  • Assembly Notes: Panels are assembled with corner loops facing each other and down tube loops back. Net lacing should be snug, starting from the bottom middle of the wiggle wire. Bolts and butterfly nuts are used to secure side panels. Top net connection uses thin short rope corner ties and a heavy main rope.

Shooter Tutor with replaceable target nets:

  • Function: Provides specific target zones for shooting practice.
  • Components:
    • Shooter Tutor (69991)
    • Straight pipe (9992)
    • Straight pipe with swedge (9993)
    • Centre target net (9994)
  • Installation Notes: Can be used with or without the target net. Attaches to the goal frame using Velcro straps. Centre bottom net target is installed first, followed by 4 corner net targets. The Shooter Tutor is placed on the frame, and webbing is slipped between the backstop and goal (if backstop is installed). Ensure the Shooter Tutor is not touching the ground and is centered. Pipes are inserted into the bottom pockets.
  • Replaceable Nets: All target nets are replaceable and can be ordered online.

Usage Features:

  • Easy Assembly: Instructions guide users through connecting parts, emphasizing proper bolt and nut placement.
  • Portability: The back folding design allows for compact storage. The optional Wheel Kit further enhances portability, making it easy to move the goal.
  • Net Alignment: The hockey net features red and green tabs to ensure correct alignment during installation.
  • Secure Lacing: Detailed instructions are provided for lacing the net and backstop, ensuring a snug and secure fit.
  • Skill Development: The optional Backstop Kit with Targets and Shooter Tutor offer dedicated features for improving shooting accuracy and catching missed shots.
  • Folding and Storage (with net attached):
    1. Release button on the back bar support and pull apart.
    2. Pull pins on both folding legs.
    3. Press 4 buttons on the top rail to fold down the top shelf.
    4. Lift the base up and into the front of the goal.
    5. Reinsert pins into the top hole to secure the folded section in the up position.
    • Warning: Do not fold the backstop forward for storing without pressing the button on the side uprights. Only EZgoal models with 2.5 cm (2 in.) rings on the sides fold in.
  • Backstop Folding: The backstop is designed to fold in front of the goal by pressing a button on the bottom back of the side uprights of the EZgoal goal, allowing the ring on the goal to rotate. This enables the backstop to swing in front of the goal for storage.
  • Windy Conditions: Fold panels forward to stabilize the unit in windy conditions.
  • Safety Precautions:
    • Wear safety goggles for net assembly.
    • Children must be supervised at all times.
    • Use on a level surface.
    • Never use near steps or stairs.
    • For outdoor use only.
    • Maintain 8 feet clearance from structures (fence, garage, house, branches, laundry lines, electrical wires).
    • Use common sense and precautions as with any sport.
    • Secure unit to prevent high winds from blowing it over.
    • NEVER allow anyone (people or pets) to stand behind the net or in the path of a ball/puck.
    • Inspect unit before and during each use; replace worn or damaged parts.
    • Never allow children to stand on the unit.
    • Do not use bungees for purposes other than applying the net.
    • Always wear recommended safety equipment during sporting activity.
    • Never leave children unattended.
    • Use protective eyewear when securing bungees.

Maintenance Features:

  • Part Replacement: The manual provides a detailed list of parts with corresponding part numbers, facilitating easy identification and ordering of replacements for missing, broken, or worn components.
  • Customer Service: Dedicated customer service is available via email (service@ezgoal.net) or phone (+1 203-591-9032) for missing parts, replacements, or assembly help. Users are encouraged to provide their name, contact information, part numbers, and pictures if possible for quicker resolution.
  • Inspection: Regular inspection of the unit before and during each use is recommended to identify and replace any worn or damaged parts.
  • Net Durability: The use of durable materials for the net and frame ensures longevity, but replacement nets are available for the Shooter Tutor, indicating a design for extended use.

EZ Goal 38 Specifications

General IconGeneral
BrandEZ Goal
Model38
CategorySports & Outdoors
LanguageEnglish

Related product manuals