EZ Goal 63074 W - User Manual

Work on a smooth, flat surface. Lay out all components so they are in easy reach.
Read assembly instructions completely to familiarize yourself with the components.
2" Top, bend tube with swedge
2" Front, Top, base tube
with swedge.
1.25" Back Base Bend
S-08
S-02
S-09
1.25" Back Base Bend
with swedge
1.25" Back Base Extension
with swedge
2"
2"
1.25"
12'x6' KICKBACK / SOCCER GOAL ASSEMBLY INSTRUCTIONS
#42
#63074
W
Upright Side Frame
S-19
S-13
S-14
203 591 9032
WATERBURY, CT 06710, U.S.A
63074 e
nglish 07 29 16 Rev1
1
Customer Service: Service@ezgoal.net or 203 591 9032
S-13
S-14
S-19
U.S. Patent Nos. 6,558,279 6,652,395
Canadian Patent No. 2,313,845
And Other Patents Pending
Note: Precision Connections will fit snugly. Use
a rubber mallet or block of wood if needed.

Summary

Installation Instructions

Customer Service Contact

Provides contact details for customer service for assistance with missing parts or assembly help.

Exploded View and Parts

Frame Assembly

Step 1: Connect Front Face Parts

Connect the front face components together on a flat surface as shown in Figure 1.

Step 2: Assemble Base and Connect to Front Frame

Assemble base parts and attach to the folding section, ensuring correct orientation.

Step 3: Attach Side Bars; Side Tilting Assembly

Connect side tubes to front tubes using bolts and nuts as shown in Figure 3.

Step 4: Connect Side Bars to Rear Base

Attach side bars to the rear base frame, securing with pull pins as detailed in Figure 4.

Step 5: Final Frame Connections

Complete the frame assembly by flipping the goal and inserting pull pins as shown in Figure 5.

Goal Assembly

Step 1: Drape Net

Drape the net over the top portion of the frame, allowing it to hang evenly.

Step 2: Attach Net with Bungees

Attach the net to the frame using bungees according to the layout, ensuring even tension.

Kickback;Rebounder Assembly

Step 1: Assemble Kickback Bar

Lay out and snap together the parts for the kickback bar as shown in Figure 7.

Step 2: Attach Bungees to Kickback Bar

Attach 11 bungees with hooks to the kickback bar evenly, then lift and attach to the upright frame.

Multi-Angle Rebounding Adjustment

Adjust the goal angle for multi-angle rebounding by removing pull pins and shortening the adjusting bar.

Tilting the Kickback for Rebounding

Adjusting Goal Angle for Air Rebounding

Learn how to adjust the goal angle by manipulating side bars and pull pins as detailed in Figure 11.

Folding & Storage

Step 1: Prepare for Folding

Remove pull pins from the base and adjust the side bar as described in Detail G and E.

Step 2: Extend Side Bar

Extend the side bar and insert the flat plate into the slot on the folding section.

Step 3: Fold and Store the Frame

Fold the base towards the front, secure with bungees, and store in a dry area.

Replacement Parts and Nets

Customer Assistance

Safety Precautions

EZ Goal 63074 W Specifications

General

Brand	EZ Goal
Model	63074 W
Category	Sports & Outdoors
Language	English