9
Media mode
• For the software supported on the Media Software Key Mapping Support List, just
press the media control keys ( , etc. ) to control the software and playback
contents. If the software is not supported on the list, please use the mouse for control or you
may create a key mapping code book for the software. Please refer to the Remote Control
Multimedia Software section in EZ Input help system for details.
3. Manage the Presentation
• Bring up the PowerPoint or other presentation tools.
• Control PowerPoint with EZ Commander in PC mode.
In PC mode, you may use EZ Commander to control PowerPoint with or without EZ Input.
Just press the PC key to switch EZ Commander to PC mode and switch EZ Input to standby
mode. Then, press Show key to start the slide show. You may use PgUp / PgDn keys or
arrow keys to backward / forward the slide show. When finished, press the ESC key to stop
the slide show.
• Control PowerPoint with EZ Commander in Media mode.
This is recommended for a trade show or multimedia presentation. Just press Media key to
switch both EZ Commander and EZ Input into media mode. Then use key to start the
slide show. Use / ( or / , / ) to backward / forward the slide
show. When finished, press the ESC key to stop the slide show. You may integrate audio /
video or other media into the trade show and control all applications with EZ Commander at
the same time (using the media control key set).
To Next Page
Loading...