10
EZ Input Preferences Window
EZ Input supports up to 10 different languages. Users can use the PC key to select a language, as
described in the Getting Started - Section 1. The EZ Input Preferences Window allows users
to temporarily disable languages users do not wish to use. Languages can be re-enabled at a later time,
if desired.
To open the Preferences Window, press ESC key to close the EZ Input dialogue window first,
or press Media key to switch to Media mode. Then mouse right click on the EZ Input tray icon
and select “Preferences… ” as follows.
The Preferences window will appear as follows.
As you can see, by default, “English” is selected. Users can enable or disable any other languages by
checking or un-checking the respective check boxes. Click on the OK button once selections have
been made. In this example, the input keypads will show up in the following sequence when you keep
pressing the PC key.
To Next Page
Loading...