1
Important Safety Regulations
Please read the User Manual carefully, and follow the safety guidelines before using this device.
WARNING
You are cautioned that any changes or modifications not expressly approved in this manual could void
your authority to operate this equipment.
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electric shock, do
not open the case. Please refer all servicing to qualified personnel only. Any attempt to open covers
other than the battery cover will void the warranty.
CAUTION
As the laser beam on the EZ Commander is harmful to the eyes, do not point the laser at any person for
any reason. When not in use, do not leave the device unattended or within the reach of small children.
Please remove the batteries if this device is to be left unused for longer than one month.
The EZ Commander (Model No. EZ902) is classified as a
CLASS II LASER PRODUCT.
The CLASS II LASER PRODUCT label is located on the
back of the device.
FCC Compliance
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to
Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the
following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation.
3. Unauthorized equipment changes may void FCC certification.
Manufacturer
Company Name: EZ@Home Technology, Inc.
Model No.: EZ902
Address: 303 Twin Dolphin Drive, Suite 600
Redwood City, CA 94065
U.S.A.
Web site: www.EZCommander.com
Telephone No.: (650) 632-4566
To Next Page
Loading...