4.6 Restore factory Settings
Long press + for 3s to enter the factory setting in main loop charging current interface
5. PROTECTION FUNCTION
Protection
Solar panels is reversed
Solar panel can be reserved if
Battery is not connected
Battery is reserved
Battery over-voltage
Battery over-discharge
Battery can be reserved if PV is
unconnected
Battery voltage reaches the
over-voltage point
Condition Status
Controller ins’t broken
Stop charging and discharging
Battery voltage drops the un-
der-voltage point
Stop discharging
Over-load
e load current is over the rated
current
Turn o the output
Note : you can short press + key to eliminate the error code.
To Next Page
Loading...