5110 – 62
n
Street
Vegreville, AB T9C 1N6
Canada
Ph: (780) 632-2126
Fx: (780) 632-6221
www.ezeeon.com
Tandem Disc Pre-Delivery Inspection/ Warranty Registration
Dealership __________________________________ Location _____________________Delivery Date: ___.___.___
mm dd yyyy
Model __________________ Width _________ Serial #_____________________ New Machine Demo Unit
Items for Dealership technician to inspect prior to delivery:
Torque all wheel bolts/ lug nuts to specifications Check Operator’s Manual to ensure all decals are correctly installed
Check tire pressures are correct. (Affects leveling process) Connect Disc to tractor with a suitable pin and then lift the hitch jack
Level machine. Refer to Operator’s Manual for detailed instructions Check hydraulic hoses are leak free and hydraulic cylinders are filled with oil
Lubricate the entire machine as recommended in the Operator’s Manual Adjust mounted harrows as required (if equipped)
Check tightness of all bolts Check overlap measurement of front gangs (Does not apply to model 395)
Check the correct # of depth stops are installed on mounting bar. (8) Check opening measurement between two inner blades of rear main frame gangs
*(Model 395 Offset disc has only (5) depth stop segments)
Set front and rear gangs at medium angle (if adjustable) Check all electrical components (safety lights) and connections
Adjust scrapers so they come into contact with blades Ensure hydraulic lockout valves function properly
Pre-Delivery completed by ______________________________________(signature) Date _____/_____/_____
mm dd yyyy
Items for Dealership staff to cover with customer upon delivery:
Give the Operator’s Manual to your customer Connect hydraulics, wiring harness, safety chain, etc.
Inform your customer of all safety precautions, maintenance procedures, Ensure machine functions properly. (Fold/Unfold, no leaks, lights work, etc)
and proper operation of the Disc
Take the Disc to a field (preferably where the ground is level, if possible) and
Verify correct serial number perform all required leveling adjustments. Follow the Operator’s Manual
Attach Disc to tractor Explain warranty and fill out registration
Ensure hitch jack is in transport position Start tractor and run all controls so your customer understands correct operation
of the Disc and ensure all functions of the Disc are working properly
Warranty Registration
Owner’s Name ____________________________ Address __________________________ Town___________________
Province/ State____________________________ Country __________________ Postal/ Zip Code___________________
Home Phone #______________________ Cell Phone #__________________ Email Address _______________________
*The owner hereby acknowledges receipt of the Operator’s Manual and that all delivery checks have been completed as listed above. Owner furthermore
acknowledges that the Operator’s Manual is an integral part of the purchased equipment and it contains information important to the proper operation,
maintenance, and safety procedures of this machine.
Owner’s signature __________________________________________________ Date ____/_____/_______
mm dd yyyy
Dealer’s signature __________________________________________________ Date ____/_____/_______
mm dd yyyy
Mail or Fax the original copy of this Warranty Registration and Pre-Delivery/Delivery Inspection to Ezee-On Manufacturing immediately after delivery.
Warranty Registration is mandatory. Failure to complete and return this form will delay the processing of warranty claims
To Next Page
Loading...