Page 4
TRANSPORT SAFETY CONTINUED:
6. Check all reflectors and visibility and cleanliness before transporting the disc. It is important that the reflectors are clean and visible,
especially during the evening hours.
7. Regulate your speed on hillsides and curves when
transporting the disc. Loss of tractor control could result
in serious damage to the disc and possible serious injury
or death to you or those nearby.
8. Never allow anyone to ride on drawbar of the tractor or on the disc. The person riding may fall and be seriously injured.
9. When transporting disc always install the complete package of depth control stops 17" (432 mm) long on shaft of main frame cylinder.
If any components of hydraulic system failed disc could drop causing serious injury or death to operator or person(s) nearby.
OPERATION SAFETY
1. Be sure person(s) are standing clear before starting or moving the tractor and disc.
2. Only one (1) person (the operator) should be permitted on the tractor when the disc is in operation, and he/she should be familiar
with repair procedures and temporary first aid treatment.
3. Never stand between the tractor and disc when hitching disc to the tractor UNLESS all tractor controls are in neutral and the park
brake is set. The tractor could roll backwards which could result in serious injury or death to you or persons nearby.
4. When operating on hillsides, use extreme care. The tractor may tip over if it strikes a hole, ditch or other irregularity.
5. To avoid personal injury or death, always stay clear of the folding wing(s) when it is being raised, lowered or in the folded position.
If the hydraulic system failed, or if the hydraulic lever was accidentally operated, the wing could drop, resulting in serious injury or
death to you or those nearby.
6. Do not stand under wing while wing is being raised or lowered. If any components of hydraulic system should fail, or if hydraulic lever
should accidentally be operated, wing could drop causing serious injury or death.
SAFETY DECALS
1. Keep all decals clean and in good condition to provide you with a constant reminder of safe operating procedures.
2. Replace any destroyed, missing or illegible decals.
To Next Page
Loading...