EMPTY THE DIRTY WATER TANK
AUTOMATIC BRUSH CLEANING
METHOD 2:
Remove the clean
water tank from the
brush unit by pressing
the brush unit cover.
Remove the dirty
water tank from the
appliance.
Place the unit on its
storage base
It is recommended to ll the water tank by at least 1/4 and empty the dirty water tank before starting the
automatic brush cleaning. Please do not interrupt the automatic cleaning during operation. Please make
sure that the appliance is plugged in during automatic cleaning.
Open the cap of the
clean water tank.
Turn the dirty water
tank cover to open it.
Connect the appliance
to a power outlet
Fill the measuring cup with
clear, cold water.
Caution: Using warm or
hot water may damage
the appliance.
Remove the HEPA
lter.
Fill the tank with
clean water using the
measuring cup and
replace it in the brush
unit of the machine.
Empty the dirty water
tank and rinse it with
clean water.
Press the ON/OFF button to
start the automatic cleaning
①
②
①
②
ENGLISH
To Next Page
Loading...
