MAINTAINING YOUR APPLIANCE
CLEANING THE FILTER AND ITS HOUSING
CLEAN THE CLEAN WATER TANK
CLEANING THE ROLLER BRUSH
Remove the lter
from the dirty water
tank.
Remove the clean
water tank from the
brush unit.
Remove the dirty
water tank cap.
Clean the clean water
tank with clean water
Separate the two parts by
rotating them.
It is recommended to clean the clean
water tank regularly to ensure its proper
functioning.
Clean all parts with
clean water and leave
to dry for 24 hours.
①
②
Press the clean water
tank cover to remove
it from the brush unit.
Align the clean water
tank in the slots of the
brush unit and press
until you hear a «click».
Remove hair with a pair
of scissors or a sharp
object. Do not run the
brush under water to
avoid damaging the
motor.
Align the first end of
the roller brush with
the slot and then put
the other end of the
brush in the slot of the
brush block to reinstall
the roller brush.
①
②
①
①
②
ENGLISH
To Next Page
Loading...
