Enter the main menu and press , until the
You can press the and button to
reset the remote. (Invalid when charging)
When the remote is powered off for 20 minutes
the bluetooth of S1 stops broadcasting. If you
power on the remote, you need to press the
power button of S1 or restart the S1 manually
to pair the S1 and remote.
Choose the setting you want to set, press
the to enter the setting interface directly.
(QWHUPDLQPHQX
Press the to execute the current command.
E.g. Press the button when in burst mode. The
S1 starts burst capture with the preset parameters
Press the button for 3 seconds to shut the
remote down.
No operation for 120 seconds, the remote
goes to hiberate mode to save battery.
Press the button to activate the remote.
S1 Operation
Shut down the remote
To Next Page
Loading...
Need help?
General
