EasyManua.ls Logo

Ezytrail WINTON 16 - User Manual

Default Icon
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
WINTON 16/18 RANGE
OWNER’S HANDBOOK
All the info you need to know when using your
Ezytrail Winton Offroad Caravan
www.ezytrail.com.au
Read owner’s manual before using the equipment. Third party component manuals
should be read in conjunction with this manual. Maintenance guidelines must be met
or exceeded, failing to meet these guidelines may result in serious injury or death and
property damage.

Questions and Answers

  • J
    Jeremy YoungAug 16, 2025
    How to troubleshoot no 12V power in my Ezytrail WINTON 16 Caravans?
    • M
      Margaret FlemingAug 16, 2025
      If your Ezytrail Caravan has no 12V power, it might be due to several reasons. First, ensure that the Main Power Switch is turned on. Check if the battery isolator switch is on. Also, verify that the main circuit breaker hasn't tripped and reset it if needed. Examine the battery connections and tighten any loose terminals. Damaged wiring can also be a culprit, so inspect and repair or replace any damaged wires. Lastly, a flat battery can cause this issue, so try charging the battery.
  • K
    Kyle SanchezAug 19, 2025
    What to do if lights or plugs are not working in Ezytrail WINTON 16 Caravans?
    • G
      Gregory WhiteAug 19, 2025
      If the lights or plugs in your Ezytrail Caravans aren't working, start by checking if a circuit breaker has tripped and reset it. Inspect for any poor connections and rectify them. Also, make sure the circuit switch on the control panel is turned to the “ON” position.
  • M
    melissa86Aug 22, 2025
    Why is my Ezytrail WINTON 16 Caravans battery not charging?
    • D
      Dr. Monica SerranoAug 22, 2025
      If your Ezytrail Caravan's battery isn't charging, start by ensuring the charger is turned on. Check if there's mains power; if the charger doesn't turn on, the charger may be faulty, so contact your dealer for warranty or replacement. Reset any tripped circuit breakers. If the charger overheated, let it rest for 30 minutes in a ventilated area before trying again, and avoid storing items around it. A fast flashing light on the charger control panel indicates a faulty charger, requiring dealer contact for warranty or replacement. Finally, have the battery tested and replaced if it's faulty.
  • M
    Monica WeberAug 25, 2025
    How to fix no power to fridge in Ezytrail WINTON 16 Caravans?
    • T
      Todd SimpsonAug 26, 2025
      If there's no power to the fridge in your Ezytrail Caravans, start by resetting the tripped breaker. Then, find and fix any poor connections. Finally, make sure the circuit switch is turned “ON” on the control panel.
  • L
    Lisa ThomasAug 28, 2025
    What to do if the pump is working but no water flow in Ezytrail Caravans?
    • J
      jeffreydanielsAug 28, 2025
      If the pump in your Ezytrail Caravans is working but there is no water flow, there might be an airlock in the water lines. Try turning on the tap, holding your finger over the nozzle for 5 seconds, and then releasing. Repeat this several times. If that doesn't work, fill the water tank and use mains pressure to pressurize the tank. Also, check the water tank to ensure it is not empty and inspect the hoses for any kinks. Finally, a damaged or worn pump diaphragm may be the cause; consider repairing or replacing the pump.
  • F
    fowlersonyaAug 31, 2025
    Why is the circuit breaker tripping during use in my Ezytrail Caravans?
    • M
      Michael SuttonAug 31, 2025
      If the circuit breaker in your Ezytrail Caravans is tripping during use, it could be due to overloading. Check the amperage draw from the appliance. Alternatively, there might be a faulty appliance; inspect it and rectify the issue.
  • M
    Megan JohnsonSep 3, 2025
    How to troubleshoot indicators or park lights not working on Ezytrail Caravans?
    • D
      Deanna RaySep 3, 2025
      If the indicators or park lights aren't working on your Ezytrail Caravans, start by checking and cleaning the trailer plug contacts. If the pins are closed, use a knife or small screwdriver to slightly separate the split in the pin, ensuring the gap is even along the pin's length. Also, inspect the chassis wiring for any damage and repair as needed.
  • D
    Daisy RileySep 6, 2025
    What to do if the pump is not working (no noise) in Ezytrail WINTON 16 Caravans?
    • W
      Wendy PenaSep 6, 2025
      If the pump in your Ezytrail Caravans isn't working and making no noise, first check the circuit switch and circuit breaker for power from the control panel. A faulty pressure switch may also be the cause, in which case you should contact your dealer for pump replacement. Inspect electrical connections with a multimeter or test light, and ensure the battery is charged.
  • O
    Oscar HughesSep 9, 2025
    Why is the cooker not igniting in my Ezytrail Caravans?
    • R
      Rachel CampbellSep 9, 2025
      If the cooker in your Ezytrail Caravans is not igniting, replace the PIEZO battery. Ensure the gas bottle is not empty and is turned on. Check that the gas hose on the cooker is securely connected into the receiver and that the stove is clean of grease/dirt buildup. Also, make sure the hose is not twisted or kinked. If the regulator is blocked, seek professional diagnosis and help.
  • S
    Steven OlsonSep 12, 2025
    How to troubleshoot inverter not powering in Ezytrail Caravans?
    • T
      Traci OsborneSep 12, 2025
      If the inverter in your Ezytrail Caravans isn't powering, check that the 12V connections are tight and that the power switch is turned “ON”. Ensure the battery is charged. If the Inverter Fault Protection Indicator is on, refer to the User Manual.

Ezytrail WINTON 16 Specifications

General IconGeneral
Weight (Approx)2200 kg
Towing Capacity (Minimum)2500 kg
ATM2500 kg
Air ConditionerYes
Gas Capacity2 x 9 kg
FeaturesEnsuite, Kitchen
SuspensionIndependent
Battery2 x 100Ah
Solar2 x 150W

Related product manuals