FAAC A453 - Trimmer Adjustments; Function Logics

7
ENGLISH
7. TRIMMER ADJUSTMENTS
7.1 PAUSE
To set pause duration, (for automatic operation) use the “BREAK” trimmer. Duration can be adjusted from 2 to 90
seconds.
7.2 ELECTRONIC CLUTCH
To set the tripping threshold of the anti-crushing system, use the “POWER”trimmer. You are recommended to set this
torque to the current regulations.
8. ADJUSTMENTS WITH DIP-SWITCH SW1
NB.: all adjustments/settings must be made with the control unit OFF and barrier closed.
9. FUNCTION LOGICS
1234
CIGOLSKRAP
ylnosesolceslupESOLC,ylnosnepoeslupTRATS NO
ylnosesolceslupESOLC.ctesnepo-sesolc-snepo:eslupRATS FFO
CIGOLCITAMOTUA
.emitesuapretfasesolc-eR NO
delbasiD FFO
NOITAREPOLLECOTOHPGNISOLC
dnaskcolgnineponehw,TRATSskcoldesolcfi,sesreverdnaskcolgnisolcnehW
.esaelernostratser
NO
.noitomsesreverdnaskcoL FFO
NOITCNUFSKRAP
.sutatsesuapnifiemitesuapstaeper;gninepognirudseslupTRATSeviecreptonseoD NO
delbasiD
SUTATSREIRRAB
SESLUP
TRATSESOLCPOTSLLECOTOHP
DESOLC snepOtceffeoN
TRATSskcoL
repTRATSskcolrotceffeoN
3ws-pid
NEPO tceffeoNsesolC
GNISOLC noitomsesreveRtceffeoN
noitarepospotS
otniseogdna
sutatsPOTS
noitomsesreverdnaskcoL
GNINEPO tceffeoNnoitomsesreveR
no,dnaskcolrotceffeoN
3ws-pidrepstratser,esaeler
DEPPOTS
ninoitomstratseR
noitceridesrever
otnoitomstratseR
esolc
TRATSskcoL
DESOLC
sesuap,snepO
sesolc-erdna
tceffeoNTRATSskcoL
repTRATSskcolrotceffeoN
3ws-pid
ESUAPNONEPO
sesolC
royletaidemmi
esuapstaeper
4ws-pidrepemit
sesolC
yletaidemmi
noitarepospotS
otniseogdna
sutatsPOTS
,esaelerno,dnaTRATSskcoL
emitesuapsteser
GNISOLC noitomsesreveRtceffeoNsesreverdnaskcoL
GNINEPO
rotceffeoN
-pidrepsesrever
1ws
noitomsesreveR
no,dnaskcolrotceffeoN
3ws-pidrepstratser,esaeler
DEPPOTS
ninoitomstratseR
noitceridesrever
sesolCTRATSskcoL
PARKS
AUTOMATIC