FAAC T-MODE TM R Series - Page 7

P
X 1
X 2
X 1
P
X 1
ON
X 1
X 2
NEW
ENGLISH
7
PROGRAMMING
PUSH-BUTTON
8.1 DELETING A SINGLE REMOTE CONTROL
WITHIN10SECONDS
2 seconds
1)Presstwicetheprogrammingpush-buttonfor2seconds
2)Within10secondspresstheSTOPpush-buttonfor2seconds.
3)Themotorperformsabriefmovementinbothdirectionstoconfirmtheperformeddeletionoftheremotecontrol.
7 ADDING FURTHER REMOTE CONTROLS
433Mhz
1)Supplypowertothemotor.
2)Onanalreadymemory-storedremotecontrol,pressthePROGRAMMINGpush-buttonfor2secondsand,within5
seconds,presstheSTOPpush-button.
3)Ontheremotecontroltobememorystored,presstheSTOPpush-buttonwithin5seconds.
4)Themotorperformstwobriefmovementsinbothdirectionstoconfirmtheperformedmemorystoringoftheremote
control.
WITHIN5SECONDS
2 seconds
2 seconds
REMOTE CONTROL ALREADY MEMORY STORED
REMOTE CONTROL TO MEMORY STORE
Every pressing
2 seconds
8 RADIO DELETING