12 < < < <
6 Placing the decorative material
It is not allowed to add different or more materials to the combustion chamber.
Always keep the pilot burner free from decorative material!
Do not toss all the decorative material onto the burner all at once, it can be obstructed by
dust particles.
6.1 Imitation logs
Place a number of the chips onto the burner and on the cover plate
Place the imitation logs according to instructions. (see fig.3.1 or imitation logs
instruction card supplied)
Divide the remainder of the chips over the burner and the cover plate . Avoid a
thick layer onto the burner, this has a negative effect on the fire image.
Ignite the pilot and main burner according to the instructions in the user’s manual.
Assess whether the flame division is correct. If necessary, move the chips until
there is a proper division of flames.
Place the glass and check the fire image.
6.2 Pebbles
Place the pebbles on the burner and the cover plate (see fig. 3.2 or imitation logs
instruction card supplied). Avoid a double layer; this has a negative effect on the
fire image.
Place the glass and check the fire image.
To Next Page
Loading...
